PLASTICS AND ARTICLES THEREOF > PLASTICS AND ARTICLES THEREOF > I. PRIMARY FORMS
| Code | Description | Duty |
|---|---|---|
| 3901100000 | Polyethylene having a specific gravity of less than 0,94 | 6.500 % |
| 3901101000 | Linear polyethylene | 6.500 % |
| 3901101020D | High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C | 6.500 % |
| 3901101050D | Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,924 g/cm³ or more but not more than 0,928 g/cm³, -a melt flow rate (190 °C/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and -a peak melting temperature of 120 °C or more but not more than 124 °C | 6.500 % |
| D | Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,922 g/cm³ or more but not more than 0,926 g/cm³ and -a melt flow rate (190 °C/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min | 6.500 % |
+35 sub-codes
| 3901101050D | Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,924 g/cm³ or more but not more than 0,928 g/cm³, -a melt flow rate (190 °C/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and -a peak melting temperature of 120 °C or more but not more than 124 °C | 6.500 % |
| 3901101060D | Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,922 g/cm³ or more but not more than 0,926 g/cm³ and -a melt flow rate (190 °C/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min | 6.500 % |
| 3901101090D | Other | 6.500 % |
| 3901109000 | Other | 6.500 % |
| 3901109030D | Polyethylene granules, containing by weight 10|% or more but not more than 25|% of copper | 6.500 % |
| 3901109090D | Other | 6.500 % |
| 3901200000 | Polyethylene having a specific gravity of 0,94|or more | - |
| 3901201000D | Polyethylene in one of the forms mentioned in note|6(b) to this chapter, of a specific gravity of 0,958|or more at 23|°C, containing: -|50|mg/kg or less of aluminium, -|2|mg/kg or less of calcium, -|2|mg/kg or less of chromium, -|2|mg/kg or less of iron, -|2|mg/kg or less of nickel, -|2|mg/kg or less of titanium and -|8|mg/kg or less of vanadium, for the manufacture of chlorosulphonated polyethylene | - |
| 3901209000D | Other | 6.500 % |
| 3901300000 | Ethylene-vinyl acetate copolymers | 6.500 % |
| 3901300010D | For cavity filling, for use in certain types of aircraft | 6.500 % |
| 3901300020D | Copolymer of ethylene and vinyl acetate (CAS RN 24937-78-8) -containing by weight 28 % or more but not more than 49 % of vinyl acetate, -with a melt flow rate of less than 5g/10 min (190 °C/2.16 kg, ASTM D1238), -in the form of pellets | 6.500 % |
| 3901300030D | Terpolymer of ethylene, vinyl acetate and methacrylic acid (CAS RN 26375-31-5) | 6.500 % |
| 3901300099D | Other | 6.500 % |
| 3901400000 | Ethylene-alpha-olefin copolymers, having a specific gravity of less than 0,94 | 6.500 % |
| 3901400010D | High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10 min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C | 6.500 % |
| 3901400030D | Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method|in the form of pellets with: -|more than 10|% but not more than 20|% by weight of copolymer, -|a melt flow rate (MFR 190°C/2,16|kg) of 0,7|g / 10|min or more|but not more than 0,9|g / 10|min, and -|a density (ASTM D4703) of 0,911 g/cm³ or more, but not more than 0,913 g/cm³ for use in the co-extrusion processing of films for flexible food packaging | 6.500 % |
| 3901400050D | Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,924 g/cm³ or more but not more than 0,928 g/cm³, -a melt flow rate (190 °C/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and -a peak melting temperature of 120 °C or more but not more than 124 °C | 6.500 % |
| 3901400060D | Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,922 g/cm³ or more but not more than 0,926 g/cm³ and -a melt flow rate (190 °C/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min | 6.500 % |
| 3901400090D | Other | 6.500 % |
| 3901900000 | Other | - |
| 3901903000D | Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid; A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35|% or less of styrene, in one of the forms mentioned in note|6(b) to this chapter | 0.000 % |
| 3901908000 | Other | - |
| 3901908010D | For cavity filling, for use in certain types of aircraft | 6.500 % |
| 3901908053 | Other | 6.500 % |
| 3901908053D | Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with -|an acrylic acid content of 18,5|% or more but not more than 49,5|% by weight (ASTM D4094), and -|a melt flow rate of 10g/10|min (MFR 125|°C/2.16|kg, ASTM D1238) or more | 6.500 % |
| 3901908055D | Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: -|an acrylic acid content of 6|% or more but not more than 50|% by weight, and -|a melt flow rate of 1g/10|min or more at 190|°C/2.16|kg (measured using ASTM D1238) | 6.500 % |
| 3901908067D | Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11|% by weight|or more | 6.500 % |
| 3901908073D | Mixture containing by weight -|80|% or more, but not more than 94|% of chlorinated polyethylene (CAS RN 64754-90-1) and -|6|% or more, but not more than 20|% of styrene-acrylic copolymer (CAS RN 27136-15-8) | 6.500 % |
| 3901908075D | Terpolymer of ethylene, isobutyl acrylate and methacrylic acid (CAS RN 37433-35-5), in the form of pellets | 6.500 % |
| 3901908085D | Terpolymer of ethylene, n-butyl acrylate and carbon monoxide (CAS RN 61843-70-7) in the form of pellets | 6.500 % |
| 3901908091D | Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid | 6.500 % |
| 3901908092D | Chlorosulphonated polyethylene | 6.500 % |
| 3901908093D | Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets | 6.500 % |
| 3901908094D | Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35|% of styrene | 6.500 % |
| 3901908097D | Chlorinated polyethylene, in the form of powder | 6.500 % |
| 3901908099D | Other | 0.000 % |
CTH