MACHINERY AND MECHANICAL APPLIANCES > NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters
| Code | Description | Duty |
|---|---|---|
| 8414100000 | Vacuum pumps | - |
| 8414101500D | Of a kind used for the manufacture of semiconductors or solely or principally used for the manufacture of flat panel displays | 0.000 % |
| 8414102500 | Other | - |
| 8414102500 | Rotary piston pumps, sliding vane rotary pumps, molecular drag pumps and Roots pumps | - |
| 8414102510D | For use in civil aircraft | - |
+109 sub-codes
| Tandem pump consisting of: -an oil pump with displacement of 21,6 cc/rev (± 2 cc/rev) and working pressure 1,5 bar at 1 000 revolutions per minute, -vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of -666 mbar in 6 seconds at 750 revolutions per minute for use in the manufacture of engines of motor vehicles |
| 1.700 % |
| 8414102590D | Other | 1.700 % |
| 8414108100 | Other | - |
| 8414108100 | Diffusion pumps, cryopumps and absorption pumps | - |
| 8414108110D | For use in civil aircraft | - |
| 8414108190D | Other | 1.700 % |
| 8414108900 | Other | - |
| 8414108910D | For use in civil aircraft | - |
| 8414108990D | Other | 1.700 % |
| 8414200000 | Hand- or foot-operated air pumps | - |
| 8414202000D | Handpumps for cycles | 1.700 % |
| 8414208000 | Other | - |
| 8414208010D | For use in civil aircraft | - |
| 8414208090D | Other | 2.200 % |
| 8414300000 | Compressors of a kind used in refrigerating equipment | - |
| 8414302000 | Of a power not exceeding 0,4|kW | - |
| 8414302010D | For use in civil aircraft | - |
| 8414302060D | Hermetic compressor for R290 refrigerant for the production of refrigerators and freezers: -with a power not exceeding 0.4 kW, -pre-filled with lubricant from 190 ml to 210 ml, -suction and processing pipe inner diameter from 6.40 mm to 6.60 mm, -discharge pipe inner diameter from 4.80 mm to 5.00 mm, -driven by a brushless DC motor, -cooling capacity from 340 to 360 W at ASHRAE LBP 3000 rpm, -displacement from 6.5 cm³ to 7.5 cm³, -speed range from 1,600 rpm to 4,200 rpm | 2.200 % |
| 8414302090D | Other | 2.200 % |
| 8414308100 | Of a power exceeding 0,4|kW | - |
| 8414308100 | Hermetic or semi-hermetic | - |
| 8414308110D | For use in civil aircraft | - |
| 8414308150 | Other | 2.200 % |
| 8414308150D | Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm³, of the type used in refrigeration equipment | 2.200 % |
| 8414308160D | Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants: - driven by ‘on-off’ single phase alternate current (AC) or ‘brushless direct current’ (BLDC) variable speed motors, - with a nominal power rating of not more than 1,5kW, - a rated voltage of 100V or more but not more than 240V, - with a height of not more than 300mm, - an external diameter of not more than 150mm, - with a unit weight of not more than 15kg, for use in the manufacture of heat pumps for household appliances, including clothes dryers | 2.200 % |
| 8414308189D | Other | 2.200 % |
| 8414308900 | Other | - |
| 8414308910D | For use in civil aircraft | - |
| 8414308920D | Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4|kW but not more than 10|kW | 2.200 % |
| 8414308940D | Electrical compressor for motor vehicle air conditioning system: -with a power output of more than 0,4 kW but not exceeding 10 kW, for use in the manufacture of motor vehicles of subheading 8703 40 | 2.200 % |
| 8414308990D | Other | 2.200 % |
| 8414400000 | Air compressors mounted on a wheeled chassis for towing | 2.200 % |
| 8414401000D | Giving a flow per minute not exceeding 2|m$3 | 2.200 % |
| 8414409000D | Giving a flow per minute exceeding 2|m$3 | 2.200 % |
| 8414510000 | Fans | - |
| 8414510000 | Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125|W | - |
| 8414510010D | For use in civil aircraft | - |
| 8414510090D | Other | 3.200 % |
| 8414590000 | Other | - |
| 8414591500D | Fans of a kind used solely or principally for cooling microprocessors, telecommunication apparatus, automatic data processing machines or units of automatic data processing machines | 0.000 % |
| 8414592500 | Other | - |
| 8414592500 | Axial fans | - |
| 8414592510D | For use in civil aircraft | - |
| 8414592550D | Axial fans with built-in motor, for the generation of an air flow for the cooling of compressors and the distribution of air with -a direct current operating voltage of more than 10 V but not more than 14 V, or -an alternating current operating voltage of more than 185 V, but not more than 254 V, -an operating temperature of -40 °C or higher, but not higher than 70 °C, for use in the manufacture of heat pump tumble dryers and refrigerators or freezers | 2.300 % |
| 8414592560D | Axial Fan, for incorporation into instrument clusters, speedometers and infotainment systems of transport vehicles as motor vehicles of headings 8701 to 8705, with: -an air flow of not more than 0,75 m3/min (cubic meter per minute) -an air pressure of not more than 10 mmH2O -an overall acoustic noise of not more than 45 dB(A) -a diameter of not more than 65mm Equipped with DC Brushless motor with: -a rated voltage between: 3 to 16 VDC -an operating voltage between: 3 to 16 VDC -a rated current between: 0,03 to 0,30 A -an input power between: 0,3 to 1,5 W -a rotation speed between: 2500 to 10000 R.P.M, With or without a heat sink incorporated | 2.300 % |
| 8414592590D | Other | 2.300 % |
| 8414593500 | Centrifugal fans | - |
| 8414593510D | For use in civil aircraft | - |
| 8414593520D | Radial fan, with: -a dimension of 25mm (height) x 85mm (width) x 85mm (depth), -a weight of 120 g, -a rated voltage of 13,6 VDC (direct current voltage), -an operating voltage of 9 VDC or more but not more than 16 VDC (direct current voltage), -a rated current of 1,1 A (TYP), -a rated power of 15 W, -a rotation speed of 500 RPM (revolutions per minute) or more but not more than 4800 RPM (revolutions per minute) (free flow), -an air flow of not more than 17,5 litre/s, -an air pressure of not more than16 mm H2O ≈ 157 Pa, -an overall sound pressure of not more than 58 dB(A) at 4800 RPM (revolutions per minute), and with a FIN (Fan Interconnect Network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems | 2.300 % |
| 8414593530D | Electric blower for cooling the high-voltage battery of a hybrid passenger car with: -a control unit, -MOSFET inverter, -a voltage of 9 V or more but not more than 16 V, -ambient temperature of - 40 °C or more, but not more than 80 °C, for use in the manufacture of hybrid passenger cars | 2.300 % |
| 8414593540D | Electric blower for cooling the battery module: -with an operating voltage of 9 VDC or more but not more than 16 VDC, -with a centrifugal electric fan, -with a connector, -with a plastic case, -with or without a control unit for the fan electric motor, for use in the production of rechargeable batteries for hybrid and electric vehicles | 2.300 % |
| 8414593550D | DC motor centrifugal fan with: -a nominal voltage of 8 V or more, but not more than 13 V, -a nominal maximum speed of 1400 rpm or more, but not more than 1950 rpm, -a horizontal or vertical position of the fan blades shaft, -a boosting time of not more than 10 seconds, -a cable with a length of 30 cm or more, but not more than 50 cm, with RAST 2,5 connector, -a nominal power of 0,7 W or more, but not more than 3,5 W, -a tacho or feedback signal to monitor the speed | 2.300 % |
| 8414593590D | Other | 2.300 % |
| 8414599500 | Other | - |
| 8414599510D | For use in civil aircraft | - |
| 8414599590D | Other | 2.300 % |
| 8414600000D | Hoods having a maximum horizontal side not exceeding 120|cm | 2.700 % |
| 8414700000D | Gas-tight biological safety cabinets | 2.200 % |
| 8414800000 | Other | - |
| 8414801100 | Turbo-compressors | - |
| 8414801100 | Single-stage | - |
| 8414801110D | For use in civil aircraft | - |
| 8414801190D | Other | 2.200 % |
| 8414801900 | Multi-stage | - |
| 8414801910D | For use in civil aircraft | - |
| 8414801990D | Other | 2.200 % |
| 8414802200 | Reciprocating displacement compressors, having a gauge pressure capacity of | - |
| 8414802200 | Not exceeding 15|bar, giving a flow per hour | - |
| 8414802200 | Not exceeding 60|m$3 | - |
| 8414802210D | For use in civil aircraft | - |
| 8414802220D | Air membrane compressor with: -|a flow of 4,5|l/min or more, but not more than 12|l/min, -|power input of not more than 14|W, and -|a gauge pressure capacity not exceeding 400|hPa (0,4|bar) of a kind used in the production of motor vehicle seats | 2.200 % |
| 8414802290D | Other | 2.200 % |
| 8414802800 | Exceeding 60|m$3 | - |
| 8414802810D | For use in civil aircraft | - |
| 8414802890D | Other | 2.200 % |
| 8414805100 | Exceeding 15|bar, giving a flow per hour | - |
| 8414805100 | Not exceeding 120|m$3 | - |
| 8414805110D | For use in civil aircraft | - |
| 8414805190D | Other | 2.200 % |
| 8414805900 | Exceeding 120|m$3 | - |
| 8414805910D | For use in civil aircraft | - |
| 8414805990D | Other | 2.200 % |
| 8414807300 | Rotary displacement compressors | - |
| 8414807300 | Single-shaft | - |
| 8414807310D | For use in civil aircraft | - |
| 8414807330 | Other | 2.200 % |
| 8414807330D | Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants: - driven by ‘on-off’ single phase alternate current (AC) or ‘brushless direct current’ (BLDC) variable speed motors, - with a nominal power rating of not more than 1,5kW, - a rated voltage of 100V or more but not more than 240V, - with a height of not more than 300mm, - an external diameter of not more than 150mm, - with a unit weight of not more than 15kg, for use in the manufacture of heat pumps for household appliances, including clothes dryers | 2.200 % |
| 8414807350D | Hermetic heat pump compressor for R450A or R290 refrigerants: - not charged with refrigerant, - pre-charged with lubricant oil, - with a single phase induction permanent split capacitor motor or a DC brushless motor, - having suction and/or discharge connections, - with a displacement of 8,05 cm3 or more, but not more than 55 cm3, - running at 900 rpm or more, but not more than 7 800 rpm, and - with a cooling capacity of 920 W or more, but not more than 10 440 W in ASHRAE conditions | 2.200 % |
| 8414807389D | Other | 2.200 % |
| 8414807500 | Multi-shaft | - |
| 8414807500 | Screw compressors | - |
| 8414807510D | For use in civil aircraft | - |
| 8414807590D | Other | 2.200 % |
| 8414807800 | Other | - |
| 8414807810D | For use in civil aircraft | - |
| 8414807890D | Other | 2.200 % |
| 8414808000 | Other | - |
| 8414808010D | For use in civil aircraft | - |
| 8414808090D | Other | 2.200 % |
| 8414900000 | Parts | - |
| 8414900010D | For use in civil aircraft | - |
| 8414900015D | Fan assembly made of aluminium and magnesium alloy: -with an outer diameter of 54 mm or more but not more than 130 mm, -with a height of 8 mm or more but not more than 30 mm, -with two discs connected by blades of involute shape, -with or without dowel, and with or without washer, for use in the manufacture of electromotors | 2.200 % |
| 8414900020D | Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles | 2.200 % |
| 8414900025D | Scroll type compressor housing of an aluminium alloy of a kind with: -a heat resistance of 200 °C or more but not more than 250 °C, -one or more fixing points suitable for mounting an actuator, for use in the manufacture of turbochargers | 2.200 % |
| 8414900035D | Compressor head unit made of impregnated aluminium alloy for installation in air-conditioning compressors for motor vehicles with: -a width of 115 mm or more but not more than 160 mm, -a length of 115 mm or more but not more than 170 mm, -a height of 30 mm or more but not more than 100 mm, -a piece of pressure branch with pipe connection, -one or two mounting holes and -more than one overflowing hole | 2.200 % |
| 8414900045D | Pressure casted rotor front plate or cover of an electric supercharger: -of EN AC-46000 aluminium, -shot-blasted and machined, -with a hardness of 60 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506), -with a tensile strength of 240 N/mm2 or more, -with a height of 22 mm or more but not more than 26 mm, -with a diameter of 128 mm or more but not more than 136 mm, -with a weight of 220 g or more but not more than 250 g | 2.200 % |
| 8414900055D | Air conditioning compressor housing component made of aluminum alloy for installation in electric air conditioning compressors for motor vehicles: -with a width of 100 mm or more but not more than 220 mm, -with a length of 100 mm or more but not more than 230 mm, -with a height of 80 mm or more but not more than 180 mm, -with one single central bore, -machined by CNC milling or unwrought, -whether or not impregnated, -with one suction port or without | 2.200 % |
| 8414900080D | Turbocharger wheel housing of cast aluminium alloy or cast iron: - with a heat resistance up to 400°C, - with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel, for use in the automotive industry | 2.200 % |
| 8414900090D | Other | 2.200 % |