Official tariff classification decisions published by the European Commission
32 Rulings
Disposable pipette tips made of translucent polypropylene, cylindrical with conical end, available in various sizes, designed for insertion onto manual or automatic laboratory pipettes, used for precise transfer of small liquid volumes in diagnostic or research applications.
The product consists of single-use pipette tips made from translucent polypropylene, cylindrical with a conical end, available in multiple sizes. They are intended to be fitted onto manual or automatic laboratory pipettes, particularly for diagnostic or research purposes requiring accurate transfer of small liquid volumes. The primary use is as a laboratory consumable for reliable and hygienic handling of liquids. Regulatory specifics: classified under tariff heading 3926.90 (other articles of plastics) in the absence of valid medical/diagnostic specificity; possible application of IVDR regulation and CE marking for medical or diagnostic use.
Nov 29, 2024
Cooling mat for dogs
Rectangular cooling mat composed of a flexible polyurethane foam panel impregnated with a gel (water and carboxymethylcellulose), covered with a waterproof polyester fabric, designed to provide a cooling effect to an animal (dog or cat) or potentially a person. The retail-ready item is distinguished by its multilayer structure (plastic material, internal gel, external textile) and its primary use as a comfort accessory for domestic animals. The classification leans towards accessories for animals (Chapter 42, heading 4201 if considered as an accessory for domestic animals), or possibly other plastic articles with similar use (Chapter 39, heading 3924) if human use predominates; the animal access purpose remains decisive. No CE marking or notable REACH restrictions are exceptionally required for this type of product.
May 26, 2023
Pool noodle
This is a flexible article of the type 'pool noodle', a hollow tube approximately 1 meter long and 8 centimeters in diameter, made of cellular plastic foam (plastic material), floating on water and intended for swimming training or flotation assistance. It complies with the European standard EN 13138-2:2014 concerning buoyancy aids. The article also exhibits shock absorption and thermal insulation properties. This product generally falls under heading 3926 of the Combined Nomenclature (other articles of plastics), notably as a pool accessory or sporting/flotation item, subject to the absence of a more specific equipment device. Compliance with mandatory safety requirements for buoyancy aids is required.
May 31, 2021
Molded silicone elastomer bag
Rectangular molded bag made from a single piece of silicone elastomer, measuring 16.5 × 10 × 2.5 cm, equipped with a wrist strap and an integrated zipper, without internal joints. The article is intended for transporting and protecting small objects (accessories, personal effects), with a simplified design and no visible seams, typically used for personal purposes. It may be subject to regulations concerning contact materials or consumer safety depending on the final use.
Dec 16, 2020
Plastic connector housing
Plastic connector housing, rectangular hollow shape (approx. 60 × 190 × 170 mm), designed for integration into vehicles or machinery to enclose and protect electronic control modules and their contacts from dirt and humidity. Item devoid of active components, exclusively intended to provide physical protection for electronic devices, and may be subject to environmental compatibility requirements (ELV Directive for automotive, REACH requirements for the plastic material used).
Sep 9, 2020
fiber optic enclosure without connectors
Cylindrical fiber optic enclosure, approximately 140 mm in diameter and 400 mm in height, primarily made of plastics (with small metallic elements), equipped with four cable entry points at the base and an internal splice tray with grooves for fiber organization. Presented without connectors, it is intended for protection, organization, and management of fiber optic cables (splicing), typically used in telecommunications networks; classified among articles and accessories for fiber optic protection, subject to technical standards for communication networks (electromagnetic compatibility, RoHS/REACH directives for materials).
Jun 3, 2019
Steel and paper wire basket
Rectangular parallelepiped-shaped basket (approx. 32 × 27 × 20 cm), composed of a steel wire frame (approx. 4 mm diameter), fully covered with paper, serving as a support structure for a warp and weft weaving made of twisted paper wires (each strip approx. 5.5 mm wide). Steel is only present as reinforcement along the edges. The item is used for storage or decoration, falling under baskets or bowls made of vegetable matter or paper combined with metallic elements, classifiable under furniture or storage articles, and must comply with general safety requirements for materials (Regulation (EC) No 1907/2006 REACH, safety of household articles).
Jun 3, 2019
Rectangular protective case for mobile phone
Rectangular protective case for a mobile phone (approx. 7 × 14 × 0.8 cm), made of molded polycarbonate, externally covered with a layer of leather and internally lined with synthetic or artificial microfibers. Designed to cover and protect the back face and sides of the device, without covering the front face, this case is a specific protective and holding accessory, classified under textile and plastic articles for phones, subject to material labeling standards, REACH regulation, and electronic accessory safety requirements.
May 15, 2019
Plastic sheet cover
Flat, flexible, circular cover (approximately 305 cm in diameter) made of air bubble plastic material, designed to cover a swimming pool or paddling pool to maintain water temperature and protect the basin from external dirt. This item falls under pool covers or seasonal protection covers, classified as a specific accessory for swimming pools, subject to the plastics regulation (REACH), outdoor safety requirements, and possibly standards on UV resistance and suitability for aquatic environments.
Oct 10, 2018
Plastic cover for mobile phone USB port
Rectangular plastic article (approximately 18 × 5 × 2 mm), equipped with a plastic cord and a rubber seal, designed to cover and protect the USB port of a specific mobile phone model. Its main function is to prevent water and dust ingress, thereby ensuring the device's waterproofing and preservation. It is a protective accessory for electronic devices, classified under parts or accessories made of plastics for phones, subject to material requirements, REACH regulation, and safety standards related to electronic equipment.
Oct 10, 2018
Inflatable pressure ulcer prevention cushion for wheelchair
The article is an inflatable pressure ulcer prevention cushion designed to be placed on a wheelchair, consisting of two plastic air chambers covered with silicone, individually adjustable to optimize pressure distribution and seated comfort. It includes a removable non-slip textile cover equipped with Velcro straps to secure the cushion and prevent slipping. This device, intended for paramedical use, primarily aims to prevent or reduce the risk of pressure ulcers in individuals with reduced mobility or those who remain seated for extended periods. Regulatory references include Regulation 2018/603.
Apr 12, 2018
Circular steering wheel cover made of PVC, designed to cover the steering wheel of a motor vehicle.
This article is a circular steering wheel cover with a diameter of 38 cm, manufactured from plastic material (PVC), intended to cover the steering wheel of a motor vehicle. It aims to protect the steering wheel against wear, sweat, extreme temperature variations, and to enhance the interior aesthetics. It generally falls under plastic accessories and trim for motor vehicles (Chapter 39 or, depending on presentation and criteria, Note 2 to Chapter 87) and must comply with REACH regulations regarding the chemical composition of the materials.
Jun 26, 2017
Thumb rest for game console controllers
These items are thumb rests for game console controllers, approximately 20 mm in diameter and 6 mm high, made of soft silicone (plastic material) with a non-slip surface. They feature an aluminum cutout with an adhesive backing, allowing them to be installed on joysticks to improve grip, protect the controller from sweat and wear, and provide increased comfort during prolonged use. Typically classified as plastic parts and accessories for video games or consoles (Chapter 95, appropriate subheading), they are subject to consumer safety standards and REACH regulations for materials.
Jan 27, 2017
Gardening kit - bag
This gardening kit, packaged for retail sale, consists of a textile woven bag equipped with a large central pocket and four external pockets, facilitating the storage and transport of gardening tools or accessories. Primarily designed to organize and carry gardening equipment, this kit falls under textile travel or storage articles, without specific CE marking requirements, but subject to REACH compliance and regulatory labeling of textile materials.
Dec 14, 2015
Door seal / Bottom door seal
Customs classification of a sealing accessory called a "door seal" or "bottom door seal", consisting of an aluminum base (approximately 100 × 3 cm) equipped with plastic bristles (length 2 cm) and fitted with an adhesive film for attachment under the door. The bristles provide a barrier against cold, dust, and other external elements. This accessory falls under sealing trims for doors and windows, without specific CE marking, but subject to REACH compliance for the composition of the plastic and metallic materials used, in accordance with Regulation 2015/2253.
Dec 2, 2015
Silicone circular gasket with central cross incision for bottle caps
This is a small-sized silicone circular gasket with a central cross incision, placed inside a screw cap of a bottle. It functions as an anti-spillage valve for liquids or semi-liquid substances (e.g., mayonnaise, ketchup). Its primary purpose is to enable controlled dispensing of the contents under manual pressure while preventing involuntary leaks when the bottle is turned over. It is devoid of mechanical elements and is characterized by its flexible structure and use in food packaging. The classification considers the product's function, material, and typical application in food packaging, in accordance with Regulation 758/2014.
Jul 10, 2014
Wheel
A wheel approximately 20 cm in diameter and 5 cm in width, composed of a rim and a solid rubber tire made of plastic, equipped with a ball bearing made of carbon steel. It is designed as a replaceable part for the equipment of wheelchairs, walkers, or hospital beds. Its primary use relates to the mobility of medical devices or similar equipment; it must comply with applicable safety and durability standards for medical or furniture use.
Jul 25, 2013
Half of a plastic casing
Half casing made of plastic, profiled and equipped with slots and fastening systems, measuring approximately 7.5 × 5 cm, specifically designed to assemble with a second half to form the cover of a locking mechanism for a vehicle seat belt buckle. It is a custom spare part, essential for the protection and operation of the locking system, requiring dimensional precision and mechanical strength specific to automotive safety devices, in accordance with Regulation 535/2013.
Jun 7, 2013
Digital camera housing
Waterproof casing mainly made of plastics, designed to hold and protect a digital camera in humid or dusty environments. Composed of two transparent shells with metal buttons, adjustment dials, locking latches, a front glass window (with metal frame and threading for lens covers) for the lens, and a padded compartment for the viewfinder. Optional accessories include anti-reflective device, handle, and tripod screw. Main use: protection and functional use of digital cameras in hostile environments (diving, water sports, outdoor). Regulatory specifics: REACH compliance for materials, safety and waterproofing requirements of Chapter 39, possible classification as a specialized accessory for cameras.
Aug 31, 2011
Plastic figurine-dispenser, 23 cm high, representing a football player on a base, equipped with a manual mechanism to dispense candies through a specific opening by operating an arm.
This product is a plastic figurine-dispenser measuring 23 cm in height, depicting a football player on a stand, fitted with a manual mechanism that, when operated via an arm, dispenses candies contained inside through a designated opening. It combines the primary function of a confectionery dispenser with that of a toy/decorative object, intended for recreational use by children. It must meet safety requirements for toys and/or food contact containers (food contact compatibility, CE marking, REACH compliance). The classification is governed by Regulation 674/2009.
Jul 22, 2009
Copolymer of vinylidene fluoride and hexafluoropropylene
This product is a copolymer of vinylidene fluoride and hexafluoropropylene, presented in primary form, with elastomeric properties (elongation and elastic recovery), but not suitable for vulcanization with sulfur and must be cross-linked using basic compounds or peroxides. This type of fluorinated copolymer falls under the category of primary plastics materials (fluorinated elastomers – FKM/FPM), used for manufacturing technical articles requiring high chemical and thermal resistance. It must comply with the general chemical regulation (REACH) and, where applicable, with regulations concerning fluorinated plastics.
Jul 8, 2009