BTI GBBTI504314589
Description of goods
A ENDOSCOPE ACCESSORY, USED TO ASSIST WITH THE COMPLETE AND ACCURATE POSITIONING OF AN ENDOSCOPE IN THE LARGE INTESTINE. THE ACCESSORY IS FITTED TO THE END OF THE ENDOSCOPE. IT ASSISTS WITH OPTICAL VISUALISATION, DIAGNOSIS AND ENDOSCOPIC TREATMENT OF A PATIENT. IT IS A NON-STERILE, SINGLE USE, DISPOSABLE, LOOSE-FITTING SLEEVE THAT FITS OVER A STANDARD ENDOSCOPE THAT HAS A DISTAL TIP OUTER DIAMETER OF BETWEEN 12.5 - 14.3 MM AND A WORKING LENGTH OF 1680MM OR GREATER. THE DEVICE EMPLOYS 2 BALLOONS TO POSITION AND STABILISE THE ENDOSCOPE WITHIN THE PATIENT'S LARGE INTESTINE. ONE BALLOON IS BEHIND THE BENDING SECTION OF THE ENDOSCOPE (AFT BALLOON) AND THE SECOND IS IN FRONT OF THE TIP OF THE ENDOSCOPE (FORE BALLOON). WHEN BOTH BALLOONS ARE DEPLOYED AND INFLATED THE AREA IN BETWEEN IS STABILISED. THE BALLOONS CAN INFLATE UP TO 6CM IN DIAMETER. THE ACCESSORY CONSISTS OF COMPONENT PARTS WHICH ARE DETAILED BELOW, TOGETHER WITH THE CORRESPONDING MATERIALS: COMPONENTS MATERIAL: BALLOON POLYURETHANE, LOW DUROMETER SLEEVE CORE EXTRUSION: PELLETHANE 2363-80A WITH 2.5% GLYCOTUBE TRANSLUCENT, PUSHROD COEXTRUSION INNER - PFA (PERFLUOROALKOXY), INFLATION COEXTRUSION INNER - PEBAX (POLYETHER BLOCK AMIDE) 7233 SA01 MED PUSH ROD ISOPLAST 2510 (POLYURETHANE) ADHESIVE DYMAX 208-CTH-F AFT BALLOON PELLETHANE 90A FORE BALLOON SADDLE TIP PEBAX 4033 SA01 MED THE BALLOONS, PUSH RODS, SLEEVE AND AFT BALLOON INFLATION TUBE MAY ALL CONTACT THE INSIDE OF THE LARGE INTESTINE DURING A MEDICAL PROCEDURE. THE PRODUCT IS PACKAGED IN A THERMOFORMED TRAY AND LID SEALED WITH A COATED TYVEK COVER. THE TRAY IS PLACED IN A SHELF BOX TO FURTHER PROTECT THE DEVICE DURING TRANSPORTATION AND STORAGE. THE INSTRUCTIONS FOR USE ARE ALSO INSERTED INTO THE LABELLED SHELF BOX. THE PRODUCT HAS A SHELF LIFE OF SIX MONTHS.