PLASTICS AND ARTICLES THEREOF > PLASTICS AND ARTICLES THEREOF > Other plates, sheets, film, foil and strip, of plastics
| Code | Description | Duty |
|---|---|---|
| 3921110000 | Cellular | 6.500 % |
| 3921110000 | Of polymers of styrene | 6.500 % |
| 3921110010D | Acrylonitrile butadiene styrene, for use in certain types of aircraft | 6.500 % |
| 3921110090D | Other | 6.500 % |
| 3921120000 | Of polymers of vinyl chloride | 6.500 % |
+42 sub-codes
| For use in certain types of aircraft |
| 6.500 % |
| 3921120090D | Other | 6.500 % |
| 3921130000 | Of polyurethanes | 6.500 % |
| 3921131000D | Flexible | 6.500 % |
| 3921139000D | Other | 6.500 % |
| 3921140000 | Of regenerated cellulose | 6.500 % |
| 3921140020D | Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) × 100 cm (± 10 cm) × 40 cm (± 5 cm) | 6.500 % |
| 3921140080D | Other | 6.500 % |
| 3921190000 | Of other plastics | 6.500 % |
| 3921190010D | For use in certain types of aircraft | 6.500 % |
| 3921190030 | Other | 6.500 % |
| 3921190030D | Blocks with cellular structure, containing by weight: -|polyamide-6|or poly(epoxy anhydride) -|7|% or more but not more than 9|% of polytetrafluorethylene if present -|10|% or more but not more than 25|% of inorganic fillers | 6.500 % |
| 3921190050D | Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with -|a total thickness of more than 0,05|mm but not more than 0,20|mm, -|a water entry pressure between 5|and 200|kPa according to|ISO 811, and -|an air permeability of 0,08|cm$3/cm$2/s or more according to ISO 5636-5 | 6.500 % |
| 3921190053D | Sheets of closed-cell silicone foam with: -a thickness of 2,0 mm or more but not more than 4,8 mm, -a thermal insulation of more than 0,25 Km²/W but not more than 0,4 Km²/W (according to ASTM-C518) -a dielectric strength of more than 3,0 Kv/mm but not more than 3,8 Kv/mm (according to ASTM- D149) | 6.500 % |
| 3921190055D | Strip of microporous polytetrafluoroethylene on a support of a non-woven -wound on a roll on a core of 3 inches, -with a width of 69.5mm, 40.8mm, 36.5mm, 20mm, 13.5mm or 10mm for use in the manufacture of filters for kidney dialysis equipment and intravenous application | 6.500 % |
| 3921190065D | Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, for the manufacture of alkaline battery separators with: -a width of 98 mm or more but not more than 170 mm, -a thickness of 15 μm or more but not more than 36 μm, | 6.500 % |
| 3921190075D | Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: -zero transversal production direction (TD) shrinkage, -a total thickness of 8 μm or more, but not more than 40 μm, -a width of 15 mm or more, but not more than 900 mm, -a length of more than 200 m, but not more than 8 000 m, -an average pore size between 0,02 μm and 0,1 μm, -whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness, -whether or not coated with surfactant, -whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm, -whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm | 6.500 % |
| 3921190095D | Film of polyethersulfone, of a thickness of not more than 200|µm | 6.500 % |
| 3921190099D | Other | 6.500 % |
| 3921900000 | Other | 6.500 % |
| 3921901000 | Of condensation or rearrangement polymerisation products, whether or not chemically modified | 6.500 % |
| 3921901000 | Of polyesters | 6.500 % |
| 3921901005D | Corrugated sheet and plates | 6.500 % |
| 3921901010D | Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres | 6.500 % |
| 3921901030D | Multilayer film consisting of: -|a poly(ethylene terephthalate) film with a thickness of more than 100|µm but not more than 150|µm, -|a primer of phenolic material with a thickness of more than 8|µm but not more than 15|µm, -|an adhesive layer of a synthetic rubber with a thickness of more than 20|µm but not more than 30|µm, -|and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35|µm but not more than 40|µm | 6.500 % |
| 3921901090D | Other | 6.500 % |
| 3921903000D | Of phenolic resins | 6.500 % |
| 3921904100 | Of amino-resins | 6.500 % |
| 3921904100 | Laminated | 6.500 % |
| 3921904100D | High-pressure laminates with a decorative surface on one or both sides | 6.500 % |
| 3921904300D | Other | 6.500 % |
| 3921904900D | Other | 6.500 % |
| 3921905500 | Other | 6.500 % |
| 3921905525D | Prepreg sheets or rolls containing polyimide resin | 6.500 % |
| 3921905535D | Glass fibre impregnated with epoxy resin for use in the manufacture of smart cards | 6.500 % |
| 3921905540D | Three layered fabric sheet, in rolls, -|comprising a core layer of 100|% Nylon Taffeta or Nylon/Polyester blended Taffeta, -|coated on both sides with polyamide , -|of a total thickness not more than 135|μm, -|of a total weight not more than 80|g/m$2 | 6.500 % |
| 3921905570D | Membrane composed of a polyamide layer and a polysulfone layer on a polyethylene terephthalate support layer with: -a total thickness of 0,25 mm or more but not more than 0,40 mm, -a total weight of 109 g/m² or more but not more than 114 g/m² | 6.500 % |
| 3921905590D | Other | 6.500 % |
| 3921906000 | Of addition polymerisation products | 6.500 % |
| 3921906010D | For use in certain types of aircraft | 6.500 % |
| 3921906090D | Other | 6.500 % |
| 3921909000D | Other | 6.500 % |
CTH, or change within this heading to reinforced, laminated or supported material, or change within this heading following the vacuum deposition of metal on the surface of plastics.