Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:
-zero transversal production direction (TD) shrinkage,
-a total thickness of 8 μm or more, but not more than 40 μm,
-a width of 15 mm or more, but not more than 900 mm,
-a length of more than 200 m, but not more than 8 000 m,
-an average pore size between 0,02 μm and 0,1 μm,
-whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness,
-whether or not coated with surfactant,
-whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,
-whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm
PLASTICS AND ARTICLES THEREOF > PLASTICS AND ARTICLES THEREOF > Other plates, sheets, film, foil and strip, of plastics > Cellular > Of other plastics > Other > Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:
-zero transversal production direction (TD) shrinkage,
-a total thickness of 8 μm or more, but not more than 40 μm,
-a width of 15 mm or more, but not more than 900 mm,
-a length of more than 200 m, but not more than 8 000 m,
-an average pore size between 0,02 μm and 0,1 μm,
-whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness,
-whether or not coated with surfactant,
-whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,
-whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm
3921190075Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:
-zero transversal production direction (TD) shrinkage,
-a total thickness of 8 μm or more, but not more than 40 μm,
-a width of 15 mm or more, but not more than 900 mm,
-a length of more than 200 m, but not more than 8 000 m,
-an average pore size between 0,02 μm and 0,1 μm,
-whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness,
-whether or not coated with surfactant,
-whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,
-whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm
1 other codes
Duties & Measures
Third Country Duty6.500 %
Base rate (erga omnes)
Applies to all third countries without preferential agreement
6.500 %
Preferential rates(60)
+50
Preferential rates - 60 Origin
Origin
Rate
Savings
Trade agreement
Details
EU-Canada agreement: re-imported goods1006
0.000 %-6.5 pp
0.000 %
-6.5 pp
—
1
EU-Switzerland agreement: re-imported goods1007
0.000 %-6.5 pp
0.000 %
-6.5 pp
—
2
CARIFORUM1033
0.000 %-6.5 ppEU-CARIFORUM EPA
0.000 %
-6.5 pp
EU-CARIFORUM EPA
Eastern and Southern Africa States1034
0.000 %-6.5 ppESA Interim EPA
0.000 %
-6.5 pp
ESA Interim EPA
SADC EPA1035
0.000 %-6.5 ppSADC EPA
0.000 %
-6.5 pp
SADC EPA
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part.2000
0.000 %-6.5 pp
0.000 %
-6.5 pp
—
GSP-EBA2005
0.000 %-6.5 ppEverything But Arms
0.000 %
-6.5 pp
Everything But Arms
European Economic Area2012
0.000 %-6.5 ppEEA Agreement
0.000 %
-6.5 pp
EEA Agreement
1
Airworthiness tariff suspension(1)
inherited from 3921000000
ERGA OMNES
0.000 %1Regulation 1517/182018-11-01
1 certificate(s) required
C119Other certificates
Authorised Release Certificate — EASA Form 1 (Appendix I to Annex I to Regulation (EU) No 748/2012), or equivalent certificate
27
Measure not applicable
07
CD333The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended.
In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate.
The certificates which are deemed to be equivalent to Authorised Release Certificates are listed in Annex II to the Regulation (EU) 2018/1517.
Autonomous tariff suspension(1)
ERGA OMNES
3.200 %Regulation 2605/252026-01-01
Except:BY(Belarus)RU(Russia)
TM861The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products.
Article 1 paragraph 2 of Regulation (EU) 2021/2278
Low-value consignment customs duty(2)
inherited from 3900000000
ERGA OMNES
3.000 EURRegulation 0382/262026-07-01
TM01066From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where:
(a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or
(b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446.
ERGA OMNES
3.000 EUR4Regulation 0382/262026-11-01
4 certificate(s) required
C127Other certificates
Merchant product identifier
27
C128Other certificates
Non-standardised manufacturer product identifier
27
C129Other certificates
Standardised manufacturer product identifier
27
Y081Particular provisions
No standardised manufacturer product identifier for the declared product exists
27
Import not allowed
06
Import not allowed
06
Import not allowed
06
TM01066From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where:
(a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or
(b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446.
End use authorisation ships and platforms (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446)
27
Measure not applicable
07
EU003According to The Special Provisions of Section II (A) (3) of the Preliminary Provisions of the Combined Nomenclature the suspension of customs duties for goods for certain categories of ships, boats and other vessels and for drilling or production platforms shall be subject to conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods.
TM5101. Customs duties shall be suspended in respect of goods intended for incorporation in the ships, boats or other vessels classified at the following CN codes 8901 10 10; 8901 20 10; 8901 30 10; 8901 90 10; 8902 00 10; 8903 91 10; 8903 92 10; 8904 00 10; 8904 00 91; 8905 10 10; 8905 90 10; 8906 10 00; 8906 90 10 for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for fitting to or equipping such ships, boats or other vessels.
2. Customs duties shall be suspended in respect of:
(a) goods intended for incorporation in drilling or production platforms:
(1) fixed, of subheading ex 8430 49, operating in or outside the territorial sea of Member States, or
(2) floating or submersible, of subheading 8905 20, for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for equipping the said platforms.
(b) tubes, pipes, cables and their connection pieces, linking these drilling or production platforms to the mainland.
Import control(4)
inherited from 3921000000
Belarus
Regulation 0765/062025-02-25
4 certificate(s) required
Y727Particular provisions
The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 3)
29
Y728Particular provisions
The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 4)
29
L152Import certificate/licence
Import authorisation by virtue of article 1ra paragraph 10 of Council Regulation (EU) 765/2006
29
Y870Particular provisions
Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 8f of Regulation (EU) No 765/2006)
29
Import/export not allowed after control
09
CD925It shall be prohibited to purchase, import, or transfer into the Union, directly or indirectly, goods which allow Belarus to diversify its sources of revenue, thereby enabling its involvement in the Russian aggression against Ukraine, as listed in Annex XXVII, if they originate in Belarus or are exported from Belarus.
Article 1ra - Regulation (EU) 765/2006 (COUNCIL REGULATION (EU) 2024/1865)
Russia
Regulation 0833/142023-12-19
4 certificate(s) required
L142Import certificate/licence
Import authorisation by virtue of article 3i paragraph 3c of Council Regulation (EU) 833/2014
26
Y874Particular provisions
The prohibitions defined in article 3i.1 of Council Regulation (EU) No 833/2014 do not apply (see exemptions in article 3i.3aa)
26
L143Import certificate/licence
Import authorisation by virtue of article 12b.2 of Council Regulation (EU) 833/2014
26
Y859Particular provisions
Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 12e of Regulation (EU) No 833/2014)
26
Import not allowed
06
CD875It shall be prohibited to purchase, import, or transfer, directly or indirectly, goods which generate significant revenues for Russia thereby enabling its actions destabilising the situation in Ukraine, as listed in Annex XXI into the Union if they originate in Russia or are exported from Russia.
With regard to the goods listed in Part B of Annex XXI, the prohibitions in paragraph 1 shall not apply to the execution until 8 January 2023 of contracts concluded before 7 October 2022, or of ancillary contracts necessary for the execution of such contracts.
By way of derogation from paragraphs 1, the competent authorities may authorise the purchase, import or transfer of the goods listed in Annex XXI, or the provision of related technical and financial assistance, under such conditions as they deem appropriate, after having determined that this is necessary for the establishment, operation, maintenance, fuel supply and retreatment and safety of civil nuclear capabilities, and the continuation of design, construction and commissioning required for the completion of civil nuclear facilities, the supply of precursor material for the production of medical radioisotopes and similar medical applications, or critical technology for environmental radiation monitoring, as well as for civil nuclear cooperation, in particular in the field of research and development.
Council Regulation (EU) No 833/2014 - Article 3i (Council regulation (EU) 2022/576)
Ukraine
Regulation 0692/142026-06-24
EU-Ukraine DCFTA(since 2016)
3 certificate(s) required
Y997Particular provisions
Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
26
N864UN/EDIFACT certificate
Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
26
N954UN/EDIFACT certificate
Movement certificate EUR.1
26
Import not allowed
06
CD967I. According to Council Regulation (EU) No 692/2014, it shall be prohibited to import into European Union goods originating in Crimea or Sevastopol.
The prohibition shall not apply in respect of goods originating in Crimea or Sevastopol which have been made available to the Ukrainian authorities for examination, for which compliance with the conditions conferring entitlement to preferential origin has been verified and for which a certificate of origin has been issued in accordance with the Association Agreement between the European Union and its Member States, of the one part, and Ukraine, of the other part.
II. According to the Council Regulation (EU) 692/2014, the export of goods and technologies suited for use in the sectors of transport; telecommunications; energy; prospection, exploration and production of oil, gas and mineral resources is prohibited:
(a) to any natural or legal person, entity or body in Crimea or Sevastopol, or
(b) for use in Crimea or Sevastopol.
Ukraine
Regulation 0263/222026-06-24
EU-Ukraine DCFTA(since 2016)
3 certificate(s) required
Y984Particular provisions
Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
29
N954UN/EDIFACT certificate
Movement certificate EUR.1
29
N864UN/EDIFACT certificate
Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
29
Import/export not allowed after control
09
CD860According to Council Regulation (EU) 2022/263 (OJ L42I, p. 77):
I. It shall be prohibited to import into the European Union goods originating in non-government controlled areas of the Donetsk, Kherson, Luhansk and Zaporizhzhia oblasts of Ukraine.
The import prohibitions not apply in respect of:
(a) the execution until 24 May 2022 of trade contracts concluded before 23 February 2022, or of ancillary contracts necessary for the execution of such contracts, provided that the natural or legal person, entity or body seeking to perform the contract has notified, at least 10 working days in advance, the activity or transaction to the competent authority of the Member State in which they are established;
(b) goods originating in the specified territories which have been made available to the Ukrainian authorities for examination, for which compliance with the conditions conferring entitlement to preferential origin has been verified and for which a certificate of origin has been issued in accordance with the EU-Ukraine Association Agreement.
II. It shall be prohibited to sell, supply, transfer or export goods and technology listed in Annex II to Council Regulation (EU) 2022/263:
(a) to any natural or legal person, entity or body in the specified territories, or
(b) for use in the specified territories. Annex II shall include certain goods and technologies suited for use in the following key sectors:
(i) transport;
(ii) telecommunications;
(iii) energy;
(iv) the prospecting, exploration and production of oil, gas and mineral resources.
The prohibitions in point II above shall be without prejudice to the execution until 24 August 2022 of an obligation arising from a contract concluded before 23 February 2022, or from ancillary contracts necessary for the execution of such contracts, provided that the competent authority has been informed at least five working days in advance.
Import control -fluorinated greenhouse gases(1)
inherited from 3921190000
ERGA OMNES
Regulation 0573/242026-03-05
4 certificate(s) required
Y152Particular provisions
Exemption from import prohibition, granted for repair or servicing of existing equipment, according to the second paragraph of Article 11.1 of Regulation (EU) 2024/573
29
Y986Particular provisions
Exemption from import prohibition according to Article 11.1 and 11.2 of Regulation (EU) 2024/573
29
Y160Particular provisions
Goods other than those falling under the applicable provisions of Regulation (EU) 2024/573
29
Y169Particular provisions
Products and equipment, including parts (excluding military and repair exemption) listed in Annex IV containing F-gases or relies upon F-gases not subject to prohibition as imposed by Article 11.1. (Reg 2024/573).
29
Import/export not allowed after control
09
CD917By virtue of Article 4(6) of Regulation (EU) 2024/573, the placing on the market of fluorinated greenhouse gases shall be prohibited, unless importers provide evidence that any trifluoromethane, produced as a by-product during the production process of the fluorinated greenhouse gases has been destroyed or recovered for subsequent use, using best available techniques.
By virtue of Article 11.1. of Regulation (EU) 2024/573, the placing on the market of products and equipment, including parts thereof, listed in Annex IV, with an exemption for military equipment, shall be prohibited from the date specified in that Annex.
By virtue of Article 11.1 sub paragraph 2 (a)(b), (c) of Regulation (I) 2024/573, the placing on the market of parts of products and equipment required for repair and servicing of existing equipment listed in Annex IV shall be allowed.
By virtue of Article 11.3. of Regulation (EU) 2024/573, the placing on the market of non-refillable containers for fluorinated greenhouse gases listed in Annex I and in Section 1 of Annex II, empty, or fully or partially filled, shall be prohibited.
By virtue of Article 11.4 of Regulation (EU) 2024/573, undertakings which place on the market refillable containers for fluorinated greenhouse gases shall produce a declaration of conformity that includes evidence confirming that there are binding arrangements in place for the return of those containers for the purpose of refilling, in particular identifying the relevant actors, their obligatory commitments and the relevant logistical arrangements.
By virtue of Article 12 of Regulation (EU) 2024/573, the following products and equipment that contain fluorinated greenhouse gases or whose functioning relies upon those gases shall only be placed on the market if they are labelled as:
(a) refrigeration equipment ;
(b) air-conditioning equipment ;
(c) heat pumps ;
(d) fire protection equipment ;
(e) electrical switchgear ;
(f) aerosol dispenser that contain fluorinated greenhouse gases, including metered dose inhalers;
(g) all fluorinated greenhouse gas containers ;
(h) fluorinated greenhouse gas-based solvents ; or
(i) organic Rankine cycles.
By virtue of Article 16 of Regulation (EU) 2024/573, the placing on the market of hydrofluorocarbons shall be allowed only to the extent that importers have been allocated quota by the Commission as set out in Article 17.
By virtue of Article 19.1 of Regulation (EU) 2024/573, refrigeration and air-conditioning equipment, heat pumps and metered dose inhalers pre-charged with substances listed in Section 1 of Annex I shall not be placed on the market unless those substances with which the products or equipment have been pre-charged are accounted for within the quota system.
By virtue of Article 19.2 of Regulation (EU) 2024/573, the placing on the market of goods falling under the provisions of Article 19.1 shall be subject to the presentation of a declaration of conformity.
By virtue of Article 19.6 of Regulation (EU) 2024/573, undertakings that placed on the market less than 10 tonnes of CO2 equivalent of hydrofluorocarbons, per year, contained in the products or equipment referred to in Article 19.1 shall be exempted from the provisions of Article 19.
By virtue of Article 20.4 of Regulation (EU) 2024/573, the undertakings shall have a valid registration in the F-gas Portal prior to carrying out any of the activities listed in points (a) to (g).
By virtue of Article 23.3 (a) of Regulation (EU) 2024/573, the F-gas Portal registration identification number shall be declared.
The information listed in Article 23.3(a) to (d) of Regulation (EU) 2024/573 shall be provided to customs authorities, where relevant, in the customs declaration.
Import control -ozone-depleting substances(1)
inherited from 3921190000
ERGA OMNES
Regulation 0590/242024-03-11
8 certificate(s) required
L100Import certificate/licence
Import licence "controlled substances" (ozone), issued by the Commission
24
Y793Particular provisions
Products and equipment containing ozone-depleting substances or whose functioning relies upon those substances, imported/exported as personal effects (Article 5(2) Regulation (EU) 2024/590)
24
Y792Particular provisions
Substances, products, equipment, other than those falling within the scope of Regulation (EU) 2024/590
24
Y791Particular provisions
Exemption from prohibition for ozone-depleting substances to be used for essential laboratory and analytical uses (articles 8, 13.1(c) (import) and article 14.1(a) (export) of regulation (EU) 2024/590), and for products and equipment (articles 11.1 and 13.1(j) (import) and 14.1(g) (export) of regulation (EU) 2024/590)
29
Y789Particular provisions
Exemption from prohibition for products and equipment containing halons or whose functioning relies upon halons (see articles 13.1(h) (import) and 14.1(f) (export) of Regulation (EU) 2024/590)
29
Y790Particular provisions
Exemption from prohibition for ozone-depleting substances destined to destruction or reclamation (see articles 12, 13.1(d), 13.1(e) (import) of Regulation (EU) 2024/590), and for products and equipment (see articles 12, 13.1(i) (import) of Regulation (EU) 2024/590)
29
Y793Particular provisions
Products and equipment containing ozone-depleting substances or whose functioning relies upon those substances, imported/exported as personal effects (Article 5(2) Regulation (EU) 2024/590)
29
Y792Particular provisions
Substances, products, equipment, other than those falling within the scope of Regulation (EU) 2024/590
29
Entry into free circulation not allowed
04
Import/export not allowed after control
09
CD911The placing on the market and import of ozone-depleting substances, products and equipment containing ozone-depleting substances listed in Annex I or whose functioning relies upon those substances shall be prohibited. (Articles 4 and 5 of regulation (EU) 2024/590)
By virtue of Article 13 of Regulation (EU) 2024/590, the following imports are allowed:
(a) ozone-depleting substances to be used as feedstock in accordance with Article 6;
(b) ozone-depleting substances to be used as process agents in accordance with Article 7;
(c) ozone-depleting substances to be used for essential laboratory and analytical uses in accordance with Article 8;
(d) ozone-depleting substances for destruction by technology as referred to in Article 20(6);
(e) ozone-depleting substances for reclamation as referred to in Article 12;
(f) methyl bromide for emergency use in accordance with Article 10;
(g) recovered, recycled or reclaimed halons, under the condition that they are only imported for critical uses referred to in Article 9(1), by undertakings authorised by the competent authority of the Member State concerned to store halons for critical uses;
(h) products and equipment containing halons or whose functioning relies upon halons, for the purposes of critical uses referred to in Article 9(1);
(i) products and equipment containing ozone-depleting substances, or whose functioning relies upon those substances, for destruction, where applicable by technology as referred to in Article 20(6);
(j) products and equipment containing ozone-depleting substances or whose functioning relies upon those substances, for the purposes of essential laboratory and analytical uses as referred to in Article 8.
The imports falling under the above exemptions shall be subject to the presentation of a valid licence to customs authorities issued by the Commission pursuant to Article 16.
According to article 15.1 of Regulation (EU) 2024/590, import of non-refillable containers for ozone-depleting substances, empty, or fully or partially filled, shall be prohibited, except for essential laboratory and analytical uses as referred to in Article 8.
Undertakings which place on the market refillable containers for ozone-depleting substances shall produce a declaration of conformity that includes evidence confirming that there are binding arrangements in place for the return of those containers for the purpose of refilling. (Article 15.3 subparagraph (1) of Regulation (EU) 2024/590).
CD912Each importer, undertaking or operator that imports ozone-depleting substances, products and equipment containing ozone-depleting substances listed in Annex I or whose functioning relies upon those substances shall provide to customs authorities the licensing system registration identification number and the number of the licence pursuant to Article 13(2) and Article 14(3).
CD913By virtue of Article 17.3 (c) and (d), when importing goods, the following information shall be declared:
- net mass of ozone-depleting substance(s), also when included in products and equipment.
- net mass multiplied by the ODP of the ozone-depleting substance(s), also when included in products and equipment.
Import control -restricted goods & technologies(1)
inherited from 3921190000
North Korea
Regulation 1509/172017-09-01
1 certificate(s) required
Y920Particular provisions
Goods other than those described in the footnotes linked to the measure
29
Import/export not allowed after control
09
CD995If the declared goods are described in the footnotes linked to the measure, export/import is not allowed.
DU446Goods 1A001b from the dual use list.
Start date: 2026-01-01
Description & Classification
Common misclassifications
3921190050: Porous PTFE membrane laminated to polyester spunbonded non-woven cloth.
3921190065: Transparent acrylic acid grafted polyethylene film in rolls.
Classification tips
Microporous film of polypropylene or PP/PE/PP.
Microporous PP film or PP/PE/PP trilayer film without stated acrylic-acid grafting.
Sample products
Microporous PP/PE/PP trilayer film, 20 μm, 300 mm × 1 000 m, average pore size 0,05 μm, zero TD shrinkage.
Regulatory notes
NENC3921
Other plates, sheets, film, foil and strip, of plastics See the explanatory note to heading 3920 .
Additional noteAdditional Notes to Chapter 39
1. For the purposes of this chapter, the expression 'primary forms' applies only to the following forms: (a) liquids and pastes, including dispersions (emulsions, suspensions) and solutions; (b) blocks of irregular shape, lumps, powders (including moulding powders), granules, flakes and similar bulk forms. 2. For the purposes of subheading 3903 11, 'expansible polystyrene' means polystyrene containing a volatile blowing agent (generally pentane), in the form of beads, with a diameter generally of 0.25 mm to 3 mm, designed to expand (by heating) to form rigid cellular (foamed) material.
Non-preferential origin
specific
Other plates, sheets, film, foil and strip,
of plastics.
CTH, or change within this heading to
reinforced, laminated or supported
material, or change within this heading
following the vacuum deposition of
metal on the surface of plastics.
Residual rule
Where the country of origin cannot be determined by application of the primary rules and the other
Annex 22-01 DA 2015/2446
Related pages
FAQ
What is the EU customs duty for Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:
-zero transversal production direction (TD) shrinkage,
-a total thickness of 8 μm or more, but not more than 40 μm,
-a width of 15 mm or more, but not more than 900 mm,
-a length of more than 200 m, but not more than 8 000 m,
-an average pore size between 0,02 μm and 0,1 μm,
-whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness,
-whether or not coated with surfactant,
-whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,
-whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm (3921190075)?
The third country duty (erga omnes) for Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:
-zero transversal production direction (TD) shrinkage,
-a total thickness of 8 μm or more, but not more than 40 μm,
-a width of 15 mm or more, but not more than 900 mm,
-a length of more than 200 m, but not more than 8 000 m,
-an average pore size between 0,02 μm and 0,1 μm,
-whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness,
-whether or not coated with surfactant,
-whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,
-whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm is 6.500 %. This rate applies to imports from countries without a preferential trade agreement with the EU.
Are there tariff preferences for Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:
-zero transversal production direction (TD) shrinkage,
-a total thickness of 8 μm or more, but not more than 40 μm,
-a width of 15 mm or more, but not more than 900 mm,
-a length of more than 200 m, but not more than 8 000 m,
-an average pore size between 0,02 μm and 0,1 μm,
-whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness,
-whether or not coated with surfactant,
-whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,
-whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm (3921190075)?
Help
Need help?
Ask a question about this code or find a tariff classification expert.
Microporous monolayer polypropylene film, 12 μm, width 100 mm, length 500 m, coated with PVdF-type binder.
Synonyms
microporous PP film, PP/PE/PP trilayer film, separator film
Materials
polypropylene; PP/PE/PP
Keywords
microporous PP film · PP/PE/PP trilayer film · separator film · polypropylene; PP/PE/PP · monolayer or trilayer film · microporous · average pore size 0,02 μm to 0,1 μm · TD · PVdF
Chapter noteChapter 39 — Plastics and articles thereof
1. Throughout the Nomenclature the expression 'plastics' means those materials of headings 3901 to 3914 which are or have been capable, either at the moment of polymerisation or at some subsequent stage, of being formed under external influence (usually heat and pressure, if necessary with a solvent or plasticiser) by moulding, casting, extruding, rolling or other process into shapes which are retained on the removal of the external influence. Throughout the Nomenclature any reference to 'plastics' also includes vulcanised fibre. The expression, however, does not apply to materials regarded as textile materials of Section XI. 2. This chapter does not cover: (a) lubricating preparations of heading 2710 or 3403; (b) waxes of heading 2712 or 3404; (c) separate chemically defined organic compounds (Chapter 29); (d) heparin or its salts (heading 3001); (e) solutions (other than collodions) consisting of any of the products specified in headings 3901 to 3913 in volatile organic solvents when the weight of the solvent exceeds 50% of the weight of the solution (heading 3208); stampings of painting foils of heading 3212; (f) organic surface-active agents or preparations of heading 3402; (g) run gums or ester gums (heading 3806); (h) prepared additives for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils (heading 3811); (ij) prepared hydraulic fluids based on polyglycols, silicones or other polymers of Chapter 39 (heading 3819); (k) diagnostic or laboratory reagents on a backing of plastics, prepared diagnostic or laboratory reagents whether or not on a backing of plastics (heading 3822); (l) synthetic rubber, as defined for the purposes of Chapter 40, or articles thereof; (m) saddlery or harness (heading 4201) or trunks, suitcases, handbags or other containers of heading 4202; (n) plaits, wickerwork or other articles of Chapter 46; (o) wall coverings of heading 4814; (p) goods of Section XI (textiles and textile articles); (q) articles of Section XII (footwear, headgear, umbrellas); (r) imitation jewellery of heading 7117; (s) articles of Section XVI (machines and mechanical or electrical equipment); (t) parts of aircraft or vehicles of Section XVII; (u) articles of Chapter 90 (optical, medical instruments); (v) articles of Chapter 91 (clocks and watches); (w) articles of Chapter 92 (musical instruments); (x) articles of Chapter 94 (furniture, lamps, prefabricated buildings); (y) articles of Chapter 95 (toys, games, sports requisites); (z) articles of Chapter 96 (miscellaneous manufactured articles).
Section noteNotes to Section VII — Plastics and articles thereof; Rubber and articles thereof
1. Goods put up in sets consisting of two or more separate constituents, some or all of which fall in this Section and are intended to be mixed together to obtain a product of Section VI or VII, are to be classified in the heading appropriate to that product, provided that the constituents are: (a) having regard to the manner in which they are put up, clearly identifiable as being intended for use together without first being repacked; (b) presented together; and (c) identifiable, whether by their nature or by the relative proportions in which they are present, as being complementary one to another. 2. Except for the goods of heading 3918 or 3919, plastics, rubber, and articles thereof, printed with motifs, characters or pictorial representations, which are not merely incidental to the primary use of the goods, fall in Chapter 49.
Source: European Commission - CN Explanatory Notes (CNEN) and HS legal notes.
Yes, 57 tariff preferences are available for this code. Preferential rates apply to imports from countries with a trade agreement with the EU.
Are import controls required for Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:
-zero transversal production direction (TD) shrinkage,
-a total thickness of 8 μm or more, but not more than 40 μm,
-a width of 15 mm or more, but not more than 900 mm,
-a length of more than 200 m, but not more than 8 000 m,
-an average pore size between 0,02 μm and 0,1 μm,
-whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness,
-whether or not coated with surfactant,
-whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,
-whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm (3921190075)?
Yes, 7 import control measure(s) apply to this code (e.g. CITES, REACH, sanitary controls, etc.).
What products are classified under code 3921190075?
TARIC code 3921190075 (Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:
-zero transversal production direction (TD) shrinkage,
-a total thickness of 8 μm or more, but not more than 40 μm,
-a width of 15 mm or more, but not more than 900 mm,
-a length of more than 200 m, but not more than 8 000 m,
-an average pore size between 0,02 μm and 0,1 μm,
-whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness,
-whether or not coated with surfactant,
-whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,
-whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm) covers the following products: Microporous PP/PE/PP trilayer film, 20 μm, 300 mm × 1 000 m, average pore size 0,05 μm, zero TD shrinkage., Microporous monolayer polypropylene film, 12 μm, width 100 mm, length 500 m, coated with PVdF-type binder..
How to correctly classify a product under code 3921190075?
Microporous film of polypropylene or PP/PE/PP. Microporous PP film or PP/PE/PP trilayer film without stated acrylic-acid grafting.
What are the non-preferential origin rules for Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:
-zero transversal production direction (TD) shrinkage,
-a total thickness of 8 μm or more, but not more than 40 μm,
-a width of 15 mm or more, but not more than 900 mm,
-a length of more than 200 m, but not more than 8 000 m,
-an average pore size between 0,02 μm and 0,1 μm,
-whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness,
-whether or not coated with surfactant,
-whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,
-whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm (3921190075)?
Non-preferential origin rules for Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:
-zero transversal production direction (TD) shrinkage,
-a total thickness of 8 μm or more, but not more than 40 μm,
-a width of 15 mm or more, but not more than 900 mm,
-a length of more than 200 m, but not more than 8 000 m,
-an average pore size between 0,02 μm and 0,1 μm,
-whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness,
-whether or not coated with surfactant,
-whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,
-whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm are defined in Annex 22-01 of the UCC Delegated Act. These rules determine the country of origin for MFN duty rates, trade policy measures, and origin marking.
Can TARIC code 3921190075 be used on a customs declaration?
Yes, TARIC code 3921190075 (Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:
-zero transversal production direction (TD) shrinkage,
-a total thickness of 8 μm or more, but not more than 40 μm,
-a width of 15 mm or more, but not more than 900 mm,
-a length of more than 200 m, but not more than 8 000 m,
-an average pore size between 0,02 μm and 0,1 μm,
-whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness,
-whether or not coated with surfactant,
-whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,
-whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm) is a declarable code. It can be used directly on EU customs import and export declarations (Single Administrative Document).