Customs Search

ARTILCE IS A MEDICAL OSTOMY FILTER WHICH CONSISTS OF A POLYESTER NONWOVEN IMPREGNATED WITH A CARBON MIX WHICH IS THEN LAMINATED IN 6 LAYERS WITH AN EVA POWDER GLUE BETWEEN THE LAYERS AND A CLEAR POLYTHENE LAMINATION FILM ON THE OUTSIDE OF THE TOP AND BOTTOM LAYERS. THE MATERIAL IS THEN CUT INTO 191 MM WIDE STRIPS APPROX. 75 ML LONG, WRAPPED IN CLING FILM AND PALLETISED. THE MATERIAL IS TESTED FOR WEIGHT, THICKNESS, WIDTH, AIR PERMEABILITY AND H2S TO ENSURE THAT THE FILTER HAS ABSORBED ALL OF THE H2S. WEIGHS 0.525 KG/M2 AND IS USED IN AN OSTOMY BAG.

A MEDICAL OSTOMY FILTER WHICH CONSISTS OF A POLYEURETHANE FOAM IMPREGNATED WITH A CARBON MIX WHICH IS THEN LAMINATED BETWEEN TWO POLYAMIDE NONWOVENS WITH A SPUNLAID POLYAMIDE ADHESIVE WEB. A POWDER GLUE IS ALSO USED ON THE OUTSIDE OF THE PRODUCT TO ENABLE THE FILTER TO STICK TO THE CUSTOMER'S OSTOMY BAG WHEN HEAT IS APPLIED. THE ROLL OF LAMINATED MATERIAL IS THEN CUT INTO 24.4MM DISCS AND PACKED INTO A BOX OF 20,000. THE FILTERS ARE TESTED FOR WEIGHT, THICKNESS, DIAMETER, AIR PERMEABILITY AND H2S (HYDROGEN SULPHIDE) - THE LAST TO ENSURE THAT ALL H2S HAS BEEN ABSORBED BY THE FILTER. THE DISCS WEIGH 0.3G EACH AND THE MATERIAL THEY ARE CUT FROM WEIGH 512/GM2. THE PRODUCT IS USED TO ABSORB H2S IN AN OSTOMY BAG.

SELF ADHESIVE SILICONE NONWOVEN SHEETS IMPORTED IN ROLL FORM. THE USED IN THE MANUFACTURE OF WOUND CARE DRESSING. NON-WOVEN LAYER IS A 50/50 BLEND OF POLYESTER AND RAYON COATED WITH SILICONE POLYMER. THE SHEET IS SUPPLIED ON A WHITE POLYMER COATED PAPER SUBSTRATE 50/50 BLEND OF POLYESTER AND RAYON COATED WITH SILICONE POLYMER

SELF ADHESIVE SILICONE NONWOVEN SHEETS. INTENDED USE IS TO MAKE WOUND CARE DRESSING. THE NON-WOVEN LAYER IS A 50/50 BLEND OF POLYESTER AND RAYON COATED WITH SILICONE POLYMER. THE SHEET IS SUPPLIED ON A WHITE POLYMER COATED PAPER SUBSTRATE. THE LINER CONSISTS OF A POLYMER COATED PAPER SUBSTRATE. IMPORTED IN ROLLS. NON-WOVEN WEIGHTS 40G/M2.

TYVEK 1059B USED FOR THE MANUFACTURE OF MEDICAL PACKAGING IN THE FORM OF ROLL STOCK (AUTOMATED PACKAGING), POUCHES, DIE CUT SHEETS AND HEADER BAGS. THE BASE MATERIAL TYVEK 1059B IS SPUN-BONDED (NON-WOVEN) POLYETHYLENE, WHICH IS THEN COATED BY THE SUPPLIER WITH AN EVA POLYMERIC DISPERSION THROUGH AN AIR-KNIFE COATING PROCESS. WEIGHT - 75.9 G/M2 WITH A RANGE FROM 71.5 - 80G/M2. THE AIR PERMEABILITY (GURLEY) IS < 75 SECONDS WITH A RANGE OF 30-100.