Customs Search

A KNITTED WIND-JACKET FOR UNISEX. DESIGNED TO COVER THE UPPER PART OF THE BODY FROM THE SHOULDERS TO THE HIPS. WITH A COMPLETE FRONT OPENING FASTENED WITH A ZIP. WITH A HIGH FITTED NECK LINE. WITH LONG SLEEVES. WITH A ZIPPED POCKET ON THE FRONT AND TWO SLIT POCKETS ON THE SIDE OF THE GARMENT. WITH AN APPLIED RIBBED WELT AT THE BASE OF THE GARMENT. WITH PRINTED LOGOS ON THE ARMS AND FRONT OF GARMENT. 100% COTTON.

A KNITTED PONCHO FOR UNISEX. DESIGNED TO COVER THE UPPER PART OF THE BODY FROM THE SHOULDERS TO THE HIPS. WITH AN OPENING WHICH GOES OVER THE HEAD, WITH SIDE PRESS-STUD FASTENINGS FOR THE ARM HOLES. WITH A HOOD THAT HAS A DRAWSTRING TIGHTENING. WITH POUCH POCKETS AT THE FRONT. HEMMED. 100% COTTON.

1. Porcelain tiles for floors and walls. 2. Rectangular slabs, two different sizes 200mm x1200mm for floors and 600mm x 1200 for walls. 3. Used to cover the floors and walls to eliminate moisture and create a firm surface in high-traffic areas. 4. Porcelain tiles of a water absorption coefficient by weight not exceeding 0,5 % 5. Batching, Mixing & Grinding, Color Mixing, Spray Drying, Creating the Tile, Drying, Printing & Glazing, Firing, Polishing & Squaring, Selection & Packing

KNITTED WIND-JACKET MADE FROM 60% COTTON AND 40% POLYESTER. GARMENT HAS AN ATTACHED HOOD WITH 2 DRAWSTRINGS LONG SLEEVES WITH RIBBING AT SLEEVE ENDS COMPLETE FRONT OPENING FASTENED BY ZIP REACHING DOWN TO BELOW THE WAIST. RIBBING ALL AROUND BOTTOM OF GARMENT 2 PATCH OPEN POCKETS AT FRONT OF GARMENT ABOVE THE RIBBING AND EITHER SIDE OF ZIP. COMPANY LOGO ON LEFT CHEST AREA COLOUR: WHITE SIZE: SMALL

OXIDE CERAMIC BASED PRE-IMPREGNATED (PREPREG) MATERIAL. THE PRODUCT IS REINFORCED WITH CERAMIC FABRIC AND ENGINEERED FOR HIGH-TEMPERATURE APPLICATIONS OF UP TO 1800 DEGREES FAHRENHEIT (982 DEGREES CENTIGRADE). THE CERAMIC COMPOSITE IS IMPREGNATED WITH SLURRY COMPRISED OF WATER, DISTILLED WATER, DEIONIZED WATER, ALUMINIUM OXIDE (POWDERS), SILICON DIOXIDE, PROPYLENE GLYCOL AND GLYCERIN. AS PART OF THE MANUFACTURING PROCESS IT IS CURED AT CONVENTIONAL TEMPERATURES FOLLOWED BY A FURNACE CYCLE OF UP TO 2000 DEGREES FAHRENHEIT (1093 DEGREES CENTIGRADE). THE PRODUCT IS THEN WOUND ON A ROLL AND PIECES ARE CUT, STACKED, CURED OR FIRED LEAVING A SEMI RIGID "GREEN STATE" PART WHERE THE POWDER PARTICLES ARE FUSED TOGETHER TO FORM A SOLIDIFIED COMPOSITE. THE FINISHED PRODUCT IS USED TO MAKE PARTS FOR TURBOJET ENGINES, COMPOSITE STRUCTURES AND CONTOURED PARTS WHERE EXTREME HEAT RESISTANCE AND MANAGEMENT IS REQUIRED. PRESENTED AS A CERAMIC ROLL, LENGTH IS 23 METRES WITH A WIDTH OF 36 INCHES AND CONTAINS, BY WEIGHT, 45% OR MORE OF ALUMINA (AL2O3). THE WEAVE OF THE FABRIC IS 8 HARNESS SATIN STYLE, 1500 DENIER ROVINGS.