Customs Search

A ROTARY BIOMASS DRYER. IT REMOVES WATER AND MOISTURE FROM SOLID SUBSTANCES PRIMARILY BY INTRODUCING HOT GASES INTO A DRYING CHAMBER. THE HOT AIR ABSORBS MOISTURE FROM THE RAW MATERIAL.

A SAND DRYING MACHINE THAT COMPRISES A PUMP THAT TRANSPORTS WET OR DRY MATERIAL USING A MASS AIR BLOWER, A HOPPER, A CHAMBER THAT MIXES AIR AND THE MATERIAL TO BE TRANSPORTED, AN AUGER TO MOVE THE MATERIAL FROM THE HOPPER TO THE CHAMBER, TWO CYCLONES, ONE TO FEED AIR INTO THE CHAMBER AND ONE TO SEPARATE THE AIR AND THE MATERIAL AT THE EXIT POINT, PIPING TO CARRY THE MATERIAL FROM THE CHAMBER TO THE EXIT POINT. OPERATES BY A THERMAL DRYING PROCESS WHERE HYDRAULIC AIR COMPRESSION INCREASES AIR FLOW TEMPERATURE TO AROUND 40 DEGREES C.

A LOW PRESSURE DRYER USED TO DRY RAW PLASTICS PRIOR TO BLENDING OR SENDING THEM TO PLASTIC PROCESSING MACHINERY. CONSISTS OF 3 MATERIAL CANISTERS, A SIDE CHANNEL BLOWER WITH FILTER AND A VENTURI VACUUM GENERATOR. THE SYSTEM IS FILLED WITH MATERIAL THROUGH A REMOVABLE MATERIAL HOPPER WITH BUILT IN FILL VALVE. THE MATERIAL IS LOADED IN THE CANISTER AND HEATED WITH HOT AIR, THE CANISTER IS THEN SEALED BY BEING PLACED UNDER A VACUUM DROPPING THE BOILING TEMPERATURE OF WATER TO 56 DEGREES CELSIUS, THE DRIED MATERIAL IS THEN CONVEYED TO THE PROCESSING MACHINE. REQUIRED DRYING TEMPERATURE AND CYCLE TIME ARE SET VIA 2 THUMBWHEELS ON THE LPD CONTROLLER. PACKED ON A PALLET COVERED IN CARDBOARD CARTON. CANISTER VOLUME: 27 LITRES MAXIMUM TEMPERTAURE: 180 DEGREES CELSIUS POWER SUPPLY: 415VAC PUMP KW: 1.86KW WEIGHT: 400KG SIZE: 100CM X 90CM X 220CM

A DUST FREE FURNITURE SPRAY-BAKING BOOTH. IT CONSISTS OF 2 BOOTHS; IN THE FIRST, FURNITURE IS SPRAYED WITH PAINT OR VARNISH. THE ROOM IS THEN CLEARED FROM DUST BY A SUCTION FILTER, WHERE THE DUST IS COLLECTED ONTO A WATER CURTAIN. THE FURNITURE IS THEN TRANSFERRED INTO THE 2ND BOOTH WHERE IT IS HEATED BY AN INFRARED HEATER. THE SPRAY EQUIPMENT IS NOT BEING IMPORTED GENERATOR TYPE: UPPER INTAKE AIR FAN: 2X3KW-INTAKE CENTRIFUGAL FANS, AIR CAPACITY 16000M3/H WATER CURTAINS: STAINLESS STEEL FILTER SYSTEM: HIGH EFFIENCY FILTER HEATING: INFRARED TUBES 18UNITS X 0.6KW, ADDITIONAL 18UNITS CARBON FIBRE

INKJET PRINTHEAD FOR USE IN HIGH CAPACITY PRINTING APPLICATIONS SUCH AS TEXTILE PRINTING USING A WATER BASED INK. FOUR INCH WIDE PRINT HEAD CONTAINS MORE THAN 2500 JETTING ELEMENTS TO PROVIDE A RESOLUTION OF BETWEEN 150 DPI & 1200 DPI. THE PRINT HEAD WORKS BY PIEZO ELECTRIC VIBRATION OF THE RELEVANT NOZZLES WHICH CAUSES A DROP OF INK TO BE RELEASED. THE PRINT HEAD IS MECHANICALLY ALIGNED WITH THE PRINTER AND SCREWED INTO POSITION. THE PRINTING FACE IS MADE FROM STAINLESS STEEL, WITH A METAL FRAME HOUSING A NUMBER OF CIRCUIT BOARDS REQUIRED FOR OPERATION OF THE PRINT HEAD. TWO PLASTIC TUBES ARE ATTACHED; ONE IS TO SUPPLY THE INK OTHER FOR CLEANING PURPOSES.