Customs Search

A CENTRIFUGAL TYPE WATER EXTRACTOR, USED IN CONJUNCTION WITH A HEATER/CONDENSER HEAT EXCHANGER TO REMOVE WATER FROM BLEED AIR FROM AN AIRCRAFT ENGINE. IT IS AN IN-LINE DUCT-TYPE DEVICE THAT INCORPORTES HELICAL SWIRL VANES, MOISTURE INJECTION SYSTEM AND WATER SHAVE OFF COLLECTOR. THE HELICAL VANES OF THE WATER EXTRACTOR GENERATE A SWIRLING MOTION TO THE MOISTURE-LADEN AIR DISCHARGED FROM THE CONDENSER. THE RESULTING HEAVY WATER PARTICLES ARE CENTRIFUGED BETWEEN THE DUCT WALL AND THE DISCHARGE DUCT. THE DRY AIR EXITS THROUGHT THE OUTLET DUCT. THE SEPARATED WATER IS ROUTED FROM THE WATER SUMP THROUGH A DRAIN TO A SPRAY NOZZLE. IT IS MADE FROM WELDED AND BRAZED ALUMINIUM. THE COLLECTOR COMPRISES A PERFORATED INNER SHELL, OUTER SHELL AND WATER SUMP. APPROXIMATE DIMENSIONS13.22 IN. L X 4.63 IN. W X 5.6 IN.H.

AN AIR FILTER, USED TO FILTER COMPRESSED AIR IN PNEUMATIC APPLICATIONS. THE FILTER USES CENTRIFUGAL MOTION TO FORCE LIQUID OUT OF THE COMPRESSED AIR. AN INTERNAL SPINNER CAUSES SPINNING MOTION. THE CONDENSATE JOINS TOGETHER ON THE WALL OF THE DEVICE. WHEN THE CONDENSATE GAINS ENOUGH MASS IT FALLS TO THE BOTTOM OF THE SEPARATOR BOWL WHERE IT POOLS IN THE SUMP UNTIL IT IS FLUSHED OUT OF THE SYSTEM BY A FLOAT DRAIN VALVE. SECONDLY THE AIR WILL BE PUSHED THROUGH A FILTER TO REMOVE THE REMAINING SOLID PARTICLES OF DUST AND DIRT. REMOVING THE CONDENSATE FROM THE COMPRESSED AIR IS CONSIDERED THE PRINCIPAL FUNCTION.

A 380V CARPET WRINGER CENTRIFUGE FOR THE SQUEEZING OF WATER FROM WASHED CARPETS. IT HAS A 5.5KW MOTOR WITH AN INNER DRUM OF STAINLESS STEEL AND A ENGINE SPEED OF 1400 RPM/MIN.

MEGA FLOW SEPARATOR IS PART A WELL TEST PRODUCT LINE AND IS USED TO TRANSPORT HIGH CAPACITY GAS, OIL AND WATER IN THE SEPARATION PROCESS. THE FLOW SEPARATOR IS PORTABLE AND USES BOTH VERTICAL AND HORIZONTAL SEPARATION TECHNOLOGY. IT IS SPECIFICALLY DESIGNED TO USE HPHT GAS, CONDENSATE TEST TO RESOLVE POOR SEPARATION EFFICIENTLY TYPICALLY EXPERIENCED WITH CONVENTIONAL HORIZONTAL SEPARATORS. THERE ARE TWO STAGES IN THE SEPARATION PROCESS. FIRST PHASE ALL THE FREE LIQUID IS SPUN OUT OF THE GAS BY CENTRIFUGAL FORCE AND COLLECTED AT THE BOTTOM OF THE LIQUID CHAMBER. THE SECOND PHASE THE SMALL AMOUNT OF ENTRAINED LIQUID LEFT IN THE GAS IS REMOVED BY AN INCREASED CENTRIFUGAL FORCE AND COLLECTED BY A CYCLING CIRCUIT.

VERTICAL SEPARATOR IS PART OF WELL TEST PRODUCT LINE AND IS DESIGNED TO REMOVE LIQUIDS FROM PRODUCED GAS. THESE SEPARATORS ARE ABLE TO SEPARATE LIQUIDS FROM GAS AT RATES OF UP TO 125 MMSCF/DAY. THE GAS ENTERS THE VESSEL THROUGH TANGENTIAL NOZZLE WHICH CREATES A CENTRIFUGAL FORCE, FORCING THE HEAVIER LIQUID PARTICLES TO SPIN AROUND THE VESSEL WALLS AND DRAW TO THE BOTTOM OF THE VESSEL. ALL MEASUREMENT DEVICES ON THE SEPARATOR ARE CONNECTED TO THE ELECTRONIC DATA GATHERING SYSTEM FOR PROCESSING.