Customs Search

A CUTTING TORCH TOOL FOR PIPE CUTTING. IT CUTS BY USING JETS OF HIGHLY ENERGISED PLASMA TO CUT VIRTUALLY ANY TYPE OF PIPE IN ANY WELL CONDITION. IT DOES NOT USE EXPLOSIVES OR HAZARDOUS CHEMICALS. THE TORCH IS LOWERED INTO A WELL UNTIL THE DESIRED DEPTH IS REACHED. THE THERMAL GENERATOR IGNITES AND ACTIVIATES THE PRIMARY FUEL LOAD AND HIGHLY ENERGISED PLASMA IS PRODUCED CAUSING AN INCREASE IN INTERNAL PRESSURE. ONCE THE PRESSURE INSIDE THE TORCH EXCEEDS THAT OF THE WELL BORE, THE PROTECTIVE SLEEVE IS DISPLACED EXPOSING THE NOZZLE TO THE WELL BORE. PLASMA EXITS THROUGH THE NOZZLE TO SEVER THE TARGET. THE WELL BORE TEMPERATURE CAN REACH 260 DEGREES CENTIGRADE AND PRESSURES UP TO 20,000 PSI (137.9 MPA).

AUTOMATED ELECTROPOLISHING WET BENCH. THIS IS A CUSTOM BUILT PIECE OF EQUIPMENT TO BE USED IN THE MANUFACTURING OF MEDICAL STENTS. IN THIS PROCESS THE STENT IS PLACED IN A TANK CONTAINING ACIDS, CURRENT IS THEN DELIVERED TO THE STENT UNDER SPECIFIC PROCESS CONDITIONS. THIS CAUSES REMOVAL OF MATERIAL FROM ALL EXPOSED SURFACES OF THE STENT THUS GIVING A SMOOTH SURFACE FINISH.

AUTOMATED ELECTROPOLISHING WET BENCH. THIS IS A CUSTOM BUILT PIECE OF EQUIPMENT TO BE USED IN THE MANUFACTURING OF MEDICAL STENTS. IN THIS PROCESS THE STENT IS PLACED IN A TANK CONTAINING ACIDS, CURRENT IS THEN DELIVERED TO THE STENT UNDER SPECIFIC PROCESS CONDITIONS. THIS CAUSES REMOVAL OF MATERIAL FROM ALL EXPOSED SURFACES OF THE STENT THUS GIVING A SMOOTH SURFACE FINISH.

CLEAN KIT FOR SPUTTERING MACHINE. THE KIT IS COMPRISED OF THE FOLLOWING COMPONENTS: A LOWER SHIELD, INNER SHIELD, UPPER SHIELD, COVER RING, DEPOSITION RING, SHUTTER DISK, INNER SHIELD CLAMP AND LOWER SHIELD CLAMP. THE COMPONENTS ARE STACKED/INTERMESHED ON TOP OF EACH OTHER. THEY ENCAPSULATE THE SEMICONDUCTOR WAFER FROM THE WALLS OF THE HIGH VACUUM CHAMBER OF THE SPUTTERING MACHINE, ALLOWING CONTROLLED SPUTTERING TO TAKE PLACE AND PREVENTING METAL DEPOSITION ON THE CHAMBER WALLS. THE COMPONENTS ARE PRESENTED TOGETHER, UNASSEMBLED, IN A CASE.

PELLICLE. THIS PRODUCT IS USED IN THE SEMICONDUCTOR INDUSTRY TO PROTECT THE SURFACE OF A PHOTOMASK FROM LOOSE PARTICULATE. IT CONSISTS OF AN ANODISED ALUMINIUM FRAME WITH A SUBMICRON CELLULOSE OR FLUROPOLYMER MEMBRANE. IT IS ATTACHED TO THE PHOTOMASK WITH PRE-ADDITIVE ADHESIVE USING A PRESSURISED PELLICLE MOUNTING TOOL. THEY ARE IMPORTED PACKAGED IN BESPOKE TWO PART MOULDED CASES MADE FROM SOFT OR HARD PLASTIC.