Customs Search

A CONTROL MODULE FOR AN AUTONOMOUS UNDERWATER VEHICLE. IT CONTAINS THE MAIN VEHICLE COMPUTER WITH A SOLID STATE DISK, CONTROL ELECTRONICS AND AUTONOMOUS VEHICLE CONTROL SOFTWARE. THE COMMUNICATION IS BY WIRELESS HIGH SPEED LAN INTERFACE. THERE IS ALSO A SENSOR WHICH GIVES A MEASURE OF THE VEHICLES DEPTH. DATA ACCUMULATED DURING A MISSIONIS STORED IN A SOLID STATE FLASH MEMORY LOCATED IN THE SENSOR. THE VEHICLE LOG INCLUDING NAVIGATIONAL DATA AND ENVIRONMENTAL SENSOR DATA IS STORED ON A DEDICATED SOLID STATE FLASH DISC.

THIS IS A MULTIBEAM ECHO SOUNDER UNIT MODULE TO BE USED WITH AN AUTONOMOUS UNDERWATER VEHICLE. IT IS USED IN HYDROGRAPHIC SURVEY. IT CAN GIVE A THIRD DIMENSION TO SIDE SCAN IMAGES ENHANCING THE ABILITY TO DETECT OBJECTS ON THE SEA BED AND PLACE THESE IN THE CONTEXT OF THE SEA BED TERRAIN. IT CAN BE USED FOR DEEP AND SHALLOW WATER SURVEY

READ OUT MODULE DESIGNED FOR USE WITH A HANDHELD TILTMETER OR VOLTMETER. CONTAINING BANANA PLUG SOCKET WITH STANDARD 0.75 IN CENTRE TO CENTRE SPACING. THE MULTIMETER SERVES AS A DISPLAY FOR THE READINGS. THE MODULE POWERS THE TILTMETER FROM ONE INTERNAL 9 VOLT BATTERY. THE STANDARD CABLE HAS A QUARTER TURN CONNECTOR. THERE ARE TWO SWITCHES ON THE MODULE PANEL, A THREE POSITION TOGGLE SWITCH (TILT/OFF/TEMPERATURE) AND A PUSH BUTTON BATTERY TEST SWITCH. THE FUNCTION OF THE MODULE IS TO POWER THIS TILTMETER, WHICH SWITCHES TILTMETER OUTPUTS TO MULTIMETER DISPLAY.DIMENSIONS 111 BY 62 BY 23 MM WITH 1.2 METRES OF CABLE. WEIGHT 285 GRAMS INCLUDING BATTERIES.

INTELLIGENT INSTRUMENTATION CONTROLLER OPTIMISED FOR METEOROLOGICAL AND OCEANOGRAPHIC SYSTEMS. PCB BOARD, PART OF AN OCEANOGRAPHIC INSTRUMENT, FEATURES : DUAL PROCESSOR, LARGE MEMORY, BUILT-IN STATUS LCD, PLUG AND PLAY SENSORS INTERFACE, FULLY FIELD PROGRAMMABLE, LOW NOISE A/D CONVERTER, SIDE-DOOR BLUETOOTH COMMUNICATION FOR EASY TROUBLESHOOTING.

THERMOWELL. ITS FUNCTION IS TO BECOME PART OF A THERMOMETER ASSEMBLY. THE UNIT CONSISTS OF A METAL TUBE INSIDE ANOTHER METAL TUBE AND MAY BE STRAIGHT OR ELBOW SHAPED. THE TEMPERATURE SENSOR IS PLACED IN THE THERMOWELL WHILE IT IS ATTACHED TO A PROCESS OR TAKEN OUT FROM A MANUFACTURING PROCESS WITHOUT DISRUPTION TO THE PROCESS. THE THEROMWELL HAS NO OTHER FUNCTION THAN TO ALLOW THE THERMOMETER TO BE PLACED IN IT AND TO MAINTAIN THE INTERGRITY OF A MANUFACTUIRING PROCESS. IT IS USUALLY USED ON PIPES SMALLER THAN 4 INCHES IN DIAMETER. IT IS NORMALLY MADE FROM STAINLESS STEEL 316 IN VARIOUS GRADES AND SIZES WITH A VARIETY OF PROCESS CONNECTIONS - WELD THREAD OR CLAMP.