Customs Search

A METAL SOLENOID MANOSTAT. USED ON CIVILIAN COMMERCIAL AIRCRAFT. NON-ELECTRONIC. MAINLY CONSISTS OF: A THERMOSTAT ASSEMBLY. A SOLENOID ASSEMBLY. A NON-RETURN ASSEMBLY. INSTALLED IN THE PRESSURE CONTROL AND LIMITATION SECTION OF THE ENGINE BLEED SYSTEM. IT CAUSES THE FORMER TO CLOSE, WHICH IN TURN LIMITS THE PRESSURE DELIVERED BY THE AIR BLEED SYSTEM. TRIGGERING POINT 235/270 DEGREES C. IT CONTINUOUSLY SENSES THE TEMPERATURE OF THE AIR DELIVERED DOWNSTREAM (OF THE) PRECOOLER HEAT EXCHANGER OF THE BLEED AIR SYSTEM, AND MONITORS THE DIFFERENTIAL PRESSURE BETWEEN THE UPSTREAM OF THE BLEED PRESSURE REGULATING VALVE, AND THE DOWNSTREAM SIDE OF (THE) PRECOOLER. IT LIMITS THE AIR DELIVERY THROUGH THE BLEED AIR SYSTEM BY CONTROLING THE CLOSING OF THE BLEED PRESSURE REGULATING VALVE PNEUMATICALLY. WEIGHT 1.25 TO 1.3 LBS (0.57 TO 0.59 KG). SOLENOID ELECTRICAL POWER SUPPLY 17 TO 30 VDC.

BLEED AIR REGULATOR, A PNEUMATIC CONTROLLER DESIGNED TO PROVIDE A REGULATED CONTROL PRESSURE, WITH ELECTRICALLY CONTROLLED SHUTOFF FROM A BLEED AIR SOURCE. THE BLEED AIR REGULATOR CONTAINS A PNEUMATIC PRESSURE SWITCH, REFERENCE PRESSURE REGULATOR, REVERSE FLOW SWITCH ASSSEMBLY, RELIEF VALVE ASSEMBLY AND SOLENOID VALVE ASSEMBLY MOUNTIED IN OR ON A METAL HOUSING.

GAS REGULATOR THAT ATTACHES TO GAS BOTTLES USED IN CAMPING AND CARAVANNING AND FOR BBQS. IT CONTROLS THE DELIVERY OF GAS AT A CONSTANT PRESSURE. IT DOES NOT AFFECT THE FLOW OF GAS BUT CONTROLS THE DELIVERY PRESSURE.

CABIN PRESSURE CONTROLLER USED TO CONTROL CABIN PRESSURE IN AN AIRCRAFT. IT SUPPLIES A CABIN PRESSURE COMMAND RATE TO CONTROL CABIN PRESURE, MODULATING A CABIN AIR OUTFLOW VALVE OPEN OR CLOSED, TO DECREASE OR INCREASE CABIN PRESSURE. IT IS A DIGITAL ELECTRONIC CONTROLLER CONTAINING FIVE PLUG-IN PRINTED WIRING ASSEMBLY'S, AN INTERCONNECT ASSEMBLY, A POWER SUPPLY ASSEMBLY, A RATE AMPLIFIER, A TRANSDUCER OUTLINE, A FRONT PANEL ASSEMBLY, AND A REAR PANEL ASSEMBLY ALL MOUNTED IN A HOUSING ASSEMBLY.

AN AIR DATA TEST SET, A PIECE OF AVIATION TEST EQUIPMENT FOR USE IN TESTING AIRCRAFT FLIGHT INSTRUMENTS WHILST THE AIRCRAFT IS ON THE GROUND. A PNUEMATIC PRESSURE CONTROLLER IS USED TO TEST AND CALIBRATE AIRCRAFT AERONAUTICAL INSTRUMENTS SUCH AS: ALTIMETERS, AIRSPEED AND RATE OF CLIMB METERS. THE THREE CHANNEL PRESSURE REGULATOR AND CONTROLLER USES A PRECISION SENSOR TO DELIVER KNOWN PRESSURES TO AN AIRCRAFT'S PITOT AND STATIC TUBES, SIMULATING THE CONDITIONS OF FLIGHT SO THAT COCKPIT INSTRUMENT READINGS CAN BE MONITORED AND EVALUATED FOR ACCURACY.