Offizielle tarifliche Einreihungsentscheidungen der Europäischen Kommission
1,542 Einreihungsverordnungen
NC) (1) (2) Levain liquide à base de farine de seigle entier dans un emballage de 150 g pour la vente au détail.
Le classement est déterminé par les règles générales 1 et 6 pour l’interprétation de la nomenclature combinée et par le libellé des codes NC 2106,
10. Feb. 2026
Article de taille unique, mesurant environ 26 cm de longueur, constitué de deux coques latérales en plastique rigide de forme anatomique qui recouvrent l’articulation de la cheville et une partie du mollet.
Le classement est déterminé par les règles générales 1, 3 c) et 6 pour l’interprétation de la nomenclature combinée, par la note 7 d) de la section XI et par le libellé des codes NC 6307, 6307 90 et 6307 90 98. Le classement sous le code NC 9021 10 10 en tant qu’article et appareil d’orthopédie est exclu car l’article ne peut pas être adapté aux besoins d’un utilisateur spécifique. Étant donné que l’article est de taille unique et que les deux coques latérales sont rigides et ont une forme anatomique universelle, il n’est ni adapté ni adaptable à la forme de la cheville d’un utilisateur spécifique. En outre, l’article peut être serré uniquement à la hauteur du mollet, sans possibilité d’ajustement par serrage au niveau de l’articulation de la cheville. Par conséquent, l’article ne peut pas être adapté au handicap spécifique d’un patient au sens de l’arrêt de la Cour de justice du 7 novembre 2002, Lohmann et Medi Bayreuth, affaires jointes C-260/00 à C-263/00, ECLI:EU:C:2002:637 (voir points 38, 41, 42 et 45). En outre, étant donné que l’article n’est pas adaptable à la forme spécifique de la cheville de l’utilisateur, il ne permet pas d’empêcher complètement et en toutes circonstances certains mouvements non désirés (par exemple, l’inclinaison latérale) de l’articulation de la cheville afin de prévenir d’autres blessures (note 6 du chapitre 90) comme il est exigé pour les articles et appareils d’orthopédie de la position 9021, conformément au deuxième alinéa de la note complémentaire 2 du chapitre 90. Le classement sous le code NC 9021 10 90 en tant qu’article et appareil pour fractures est également exclu car l’article ne permet pas d’immobiliser une articulation de la cheville fracturée pour les raisons exposées ci-dessus [voir également les notes explicatives du système harmonisé relatives à la position 9021, point II) Articles et appareils pour fractures, premier alinéa]. Par conséquent, il convient de classer l’article en fonction de sa matière constitutive. Le produit est un article composite constitué de différentes matières (textiles et plastiques) au sens de la règle générale 3 b) pour l’interprétation de la nomenclature combinée. En ce qui concerne l’effet recherché, les coques en plastique ainsi que les sangles en matières textiles jouent un rôle d’importance équivalente. Par conséquent, les deux matières sont tout aussi essentielles au sens de la règle générale 3 b) pour l’interprétation de la nomenclature combinée et l’article doit être classé dans la position placée la dernière par ordre de numérotation parmi celles susceptibles d’être valablement prises en considération (positions 3926 et 6307) au sens de la règle générale 3 c) pour l’interprétation de la nomenclature combinée. Il convient dès lors de classer l’article sous le code NC 6307 90 98 en tant qu’autres articles confectionnés en toutes matières textiles.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
Item regulations:: A specially shaped bracket, made of heat- resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C. The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the gril
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire. p. 8); p. 9); p. 3); p. 35); p. 18); p. 33); p. 15); p. 5); p. 1); p. 51); p. 1); p. 3); p. 1) p. 43) p. 5). p.1) p.6) p.21) Implementing Regulation (EU) 2018/553 of p. 4) p. 1) (repealing 1 item of the Regulation) (repealing item 5 of the Regulation) (repealing item 7 of the Regulation) p. 22); p. 9); p. 5); p. 9); p. 12); p. 17); p. 9); p. 12); p. 27); p. 3); p. 37); p. 18); p. 3); p. 45); p. 34); p. 1); p. 1); p. 1) p. 29) p. 3) p 1) p 1) p 1) p. 7) p. 1) p. 16) p.1) p 3) p. 5) p. 21-22) Documented CN 2026 code: 73262000, 1999, 2003, 2005, 2006, 2009, 2010, 2013, 2014, 2015, 2017, 2019, 2020, 2022, 1989, 1990, 1991, 1992, 1993, 2007, 2011, 2018, 2023, 2024, 2025.
5. Feb. 2026
18. Nov. 2025
18. Nov. 2025
18. Nov. 2025
18. Nov. 2025
18. Nov. 2025
18. Nov. 2025
18. Nov. 2025
18. Nov. 2025
18. Nov. 2025
18. Nov. 2025
18. Nov. 2025
18. Nov. 2025
18. Nov. 2025
18. Nov. 2025
18. Nov. 2025
18. Nov. 2025
18. Nov. 2025
18. Nov. 2025
18. Nov. 2025