Customs Search

A CONTROL DISPLAY UNIT (CDU) THAT PROVIDES AN INTERFACE TO THE FLIGHT MANAGEMENT COMPUTER SYSTEM (FMCS) WHICH HOLDS THE NAVIGATION DATABASE. THE FILGHT CREW USE THE CDU TO ENTER ROUTE AND PERFORMANCE DATA FOR THE FLIGHT. IT HAS THE ADDITIONAL CAPABILITY TO FUNCTION AS AN INDEPENDENT SOURCE OF NAVIGATION. IN THIS MODE THE CDU PROVIDES LATERAL NAVIGATION FROM THE FMC. THIS ALLOWS THE CREW TO MODIFY THE FLIGHT PLAN IN FLIGHT WHEN REQUIRED. THE INFORMATION IS SHOWN AS A DIGITAL DISPLAY.

AIR DATA INERTIAL REFERENCE UNIT (ADIRU) FOR AIRBUS A340 CIVIL AIRCRAFT. THE ADIRU IS A KEY COMPONENT OF THE INTEGRATED AIR DATA INERTIAL REFERENCE SYSTEM, WHICH SUPPLIES AIR DATA (AIRSPEED, ANGLE OF ATTACK AND ALTITUDE) AND INERTIAL REFERENCE (POSITION AND ALTITUDE) INFORMATION TO THE PILOTS ELECTRONIC FLIGHT INSTRUMENT SYSTEM DISPLAYS, AS WELL AS OTHER SYSTEMS ON THE AIRCRAFT, SUCH AS THE ENGINES, AUTOPILOT, AIRCRAFT FLIGHT CONTROL SYSTEM AND LANDING GEAR SYSTEMS. AN ADIRU ACTS AS A SINGLE, FAULT TOLERANT SOURCE OF NAVIGATIONAL DATA FOR BOTH PILOTS OF AN AIRCRAFT. MANUFACTURED BY HONEYWELL INC IN THE USA.

Liquid pressure sensor assembly. Used in the pharmaceutical industry to measure pressure at a point in the process line. Comprising of a liquid pressure sensor, plastic tubing, plug fittings and tube fasteners. Sensor comes pre-calibrated and contains chip that relays information. This assembly is single use.

FLEX ARM FOR ATTACHMENT TO A VENTILATOR. IT IS PRESENTED UNASSEMBLED AND CONSISTS ESSENTIALLY OF A ROTATING FLEX ARM WITH FLEXIBLE TUBE, 2 FLEX ARM SHAFT ASSEMBLIES, SMALL AND LARGE BUTTON HEAD HANDLES AND ASSOCIATED FRICTION RING, NUTS BOLTS AND WASHERS. ONE END OF THE FLEX ARM IS EQUIPPED WITH A CLAMP FOR HOLDING THE TUBING FROM THE VENTILATOR WHILE THE OTHER END CONTAINS A BASE ARM ASSEMBLY FOR FITTING DIRECTLY ONTO THE VENTILATOR UNIT. THE FLEX ARM SUPPORTS AND HOLDS TUBING SECURELY FROM THE VENTILATOR TO THE PATIENT SO THAT DAMAGE TO, OR UNWANTED DISCONNECTION OF, THE TUBING IS AVOIDED. THE VARIOUS COMPONENTS OF THE FLEX ARM ASSEMBLY ARE MADE FROM ALUMINIUM, STEEL AND PLASTIC.

THE PRODUCT IS A MEDICAL DEVICE, AND IS AN ACCESSORY WHICH IS FITTED TO AN ENDOSCOPE TO ASSIST WITH THE COMPLETE AND ACCURATE POSITIONING OF AN ENDOSCOPE IN THE LARGE INTESTINE. THE DEVICE ASSISTS WITH OPTICAL VISUALISATION, DIAGNOSIS, AND ENDOSCOPIC TREATMENT OF A PATIENT. IS A NON-STERILE, SINGLE USE, DISPOSABLE, LOOSE-FITTING SLEEVE THAT FITS OVER A STANDARD ENDOSCOPE THAT HAS A DISTAL TIP OUTER DIAMETER OF BETWEEN 12.5 - 14.3 MM AND A WORKING LENGTH OF 1680MM OR GREATER. THE DEVICE EMPLOYS 2 BALLOONS TO POSITION AND STABILISE THE ENDOSCOPE WITHIN THE PATIENT'S LARGE INTESTINE. ONE BALLOON IS BEHIND THE BENDING SECTION OF THE ENDOSCOPE (AFT BALLOON) AND THE SECOND IS IN FRONT OF THE TIP OF THE ENDOSCOPE (FORE BALLOON). WHEN BOTH BALLOONS ARE DEPLOYED AND INFLATED THE AREA IN BETWEEN IS STABILISED. THE BALLOONS CAN INFLATE UP TO 6CM IN DIAMETER. CONSISTS OF COMPONENT PARTS WHICH ARE DETAILED BELOW, TOGETHER WITH THE CORRESPONDING MATERIALS: THE BALLOONS, PUSH RODS, SLEEVE AND AFT BALLOON INFLATION TUBE MAY ALL CONTACT THE INSIDE OF THE LARGE INTESTINE DURING A MEDICAL PROCEDURE. COMPONENTS MATERIAL: BALLOON POLYURETHANE, LOW DUROMETER SLEEVE CORE EXTRUSION: PELLETHANE 2363-80A WITH 2.5% GLYCOTUBE TRANSLUCENT, PUSHROD COEXTRUSION INNER - PFA (PERFLUOROALKOXY), INFLATION COEXTRUSION INNER - PEBAX (POLYETHER BLOCK AMIDE) 7233 SA01 MED PUSH ROD ISOPLAST 2510 (POLYURETHANE) ADHESIVE DYMAX 208-CTH-F AFT BALLOON PELLETHANE 90A FORE BALLOON SADDLE TIP PEBAX 4033 SA01 MED IS PACKAGED IN A GLIDEX/CO-EX PETG TRAY (THERMOFORMED TRAY) AND LID SEALED WITH A COATED TYVEK COVER. THE TRAY IS PLACED IN A SHELF BOX TO FURTHER PROTECT THE DEVICE DURING TRANSPORTATION AND STORAGE. THE INSTRUCTIONS FOR USE ARE ALSO INSERTED INTO THE LABELLED SHELF BOX. THE PRODUCT HAS A SHELF LIFE OF SIX MONTHS.