Décisions officielles de classement tarifaire publiées par la Commission européenne
12 Règlements
An electrical apparatus (so-called ‘wireless speaker adapter’) in a housing with dimensions of approximately 52 × 52 ×13 mm and a weight of 26 g. The wireless speaker adapter consists of: — a built-in rechargeable battery, — a digital/analogue converter, — a Bluetooth technology based transmitter and receiver (Advanced Audio Distribution Profile (A2DP), — a USB port for charging, and — a 3,5 mm audio port, for connection to a speaker system (not present upon presentation to customs). The apparat
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 8517 and 8517 62 00 . As the apparatus can only send and receive audio signals wirelessly via Bluetooth (A2DP), and does not itself generate the audio signal or produce the sound it cannot be considered a sound reproducing apparatus. Classification under heading 8519 is therefore excluded. The function of the apparatus is to receive audio data wirelessly from a device (for example a mobile phone) and to transmit those data using cables to loudspeakers. The function of receiving, converting and transmitting data is covered by the wording of CN code 8517 62 00 . The apparatus is therefore to be classified under CN code 8517 62 00 as a machine for the reception, conversion and transmission of voice or other data. Documented CN 2026 code: 85176200.
5 déc. 2016
Item 3: Radio-link controller, in a housing of dimensions of 279 × 224 × 89 mm, with eight selection buttons and an aerial. The apparatus consists of a microprocessor, a programme-memory and a radio transceiver. The radio transceiver transmits and receives data on up to eight channels within the frequency range from 403 to 512 MHz within a range of 400 metres. The device has an interface which enables it to receive data from wireless terminals and to transmit them to the network via a network-co
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, note 3 to section XVI, and by the wording of CN codes 8517 and 8517 62 00. Radio transmission/reception is the principal function that characterises the whole. Documented CN 2026 code: 85176200.
1 avr. 2004
Item 2: Network controller with a built-in radio- transceiver unit, in a housing of dimensions of 355 × 285 × 115 mm, with a liquid crystal display (4 lines × 20 characters) and a keyboard with four control buttons. The apparatus is based on a microprocessor and also contains a parameter-memory, a programme-memory and a disc-drive. The radio-transceiver unit consists of a high-frequency component (HF component) with an aerial, filter, amplifier, oscillator and frequency synthesiser. This unit tr
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, note 3 to section XVI, and by the wording of CN codes 8517 and 8517 62 00. The function as a connection unit in relation to the memory function is the principal function that characterises the whole. Documented CN 2026 code: 85176200.
1 avr. 2004
Item 4: Wireless gateway, in a housing of dimensions of 292 × 292 × 70 mm, with an aerial. The apparatus consists of a microprocessor, programme memories and a radio transceiver. The radio transceiver transmits and receives data on up to eight channels within the frequency range from 403 to 512 MHz within a range of 400 metres. The device has an interface which enables it to receive data from wireless terminals and to transmit them directly to the network. It is also connected to an automatic da
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, note 3 to section XVI, and by the wording of CN codes 8517 and 8517 62 00. Radio transmission/reception is the principal function that characterises the whole. Documented CN 2026 code: 85176200.
1 avr. 2004
Item 5: Hand-held device consisting of a microprocessor, a liquid crystal display, a keyboard with keys for data-input and control, a radio transceiver and an interface for a bar-code reader. The data are put manually into the device, the function of which is to exchange data with an automatic data-processing machine via a wireless gateway or a network-controller.
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, note 3 to section XVI, and by the wording of CN codes 8517 and 8517 62 00. Radio transmission/reception is the principal function that characterises the whole. Documented CN 2026 code: 85176200.
1 avr. 2004
Item 6: Hand-held device consisting of a microprocessor, a liquid crystal display, a keyboard with keys for data-input and control, a radio transceiver and a bar- code reader. Either manually or via the bar-code reader, the data are put into the device, the function of which is to exchange data with an automatic data- processing machine via a wireless gateway or a network-controller.
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, note 3 to section XVI, and by the wording of CN codes 8517 and 8517 62 00. Radio transmission/reception is the principal function that characterises the whole. Documented CN 2026 code: 85176200.
1 avr. 2004
Item 7: Goods-management system for the dissemination of instructions to staff (in warehouses, for example) and for the transfer of data about packaging to automatic data-processing machines, both by radio transmission within a 400- metre range and by wire. The system consists of: - a network controller - a radio-link controller - a wireless gateway - a hand-held terminal - a hand-held terminal with bar- code reader The data are sent by radio from the hand- held terminals, either to the radio-li
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 8517 and 8517 62 00. The individual interconnected components of the system do not perform any precisely defined function within the meaning of note 4 to section XVI. Documented CN 2026 code: 85176200.
1 avr. 2004
Product, known as a ‘portable baby- monitoring device’, in the form of a set put up for retail sale and consisting of: a radio-transmitter/receiver with built-in microphone and loudspeaker, a portable radio-transmitter/receiver with built-in microphone and loudspeaker, and two mains-adaptors. The radio- transmitter/receiver can be battery- or mains-powered, and can be used for intercommunication. The portable radio- transmitter/receiver is rechargeable, can be used while recharging and can be us
Classification is determined by the provisions of General Rules 1 and 6 for the interpretation of the Combined Nomenclature, and the wording of CN codes 8517 and 8517 62 00 Documented CN 2026 code: 85176200.
30 mars 2001
Item 1: Optoelectronic transmitter, capable of converting radio-frequency signals into optical signals. The apparatus transmits these optical signals through a fibre-optic cable trunk-system by means of a laser using carrier-current technology. It is located in the transmission-network of a cable-TV system
Classification is determined by General rules 1 and 6 for the interpretation of the Combined Nomenclature, and by the wording of CN codes 8517 and 8517 62 00 (see also the Explanatory Note to the Harmonized System, heading 85.17, part II). Documented CN 2026 code: 85176200.
6 mai 1999
Item 2: Optoelectronic receiver, capable of converting optical signals into radio- frequency (RF) signals after transmission by means of carrier-current technology through a fibre-optic cable trunk-system. It is located in the transmission-network of a cable-TV system. The RF-output is used to serve several trunk-lines in the local fibre service-area
Classification is determined by General rules 1 and 6 for the interpretation of the Combined Nomenclature, and by the wording of CN codes 8517 and 8517 62 00 (see also the Explanatory Note to the Harmonized System, heading 85.17, part II). Documented CN 2026 code: 85176200.
6 mai 1999
Item 4: Set put up for retail sale comprising: - an audio-unit with telephone-handset, - a telecommunication-card, - a video- camera connectable to an automatic data- processing machine, - a network- connection unit, and - two diskettes with video-telephony-application software. The set enables an automatic data- processing machine to perform an additional function (video-telephony).
Rules 1, 3(b) and 6 for the interpretation of the Combined Nomenclature, and by the wording of CN codes 8517, 8517 and 8517 62 00. The essential character of the set is given by the telecommunication apparatus (the audio unit and telecommunication card). Documented CN 2026 code: 85176200.
3 nov. 1997
Item 3: Battery-powered modem, contained in a housing of dimensions 10,2 × 6,1 × 2,5 cm, fitted with four LEDs which indicate call-status, speed, carrier-frequency and battery-status. It has a data-connector, a telephone- connector, an acoustic-coupler connector and a standard miniature telephone-jack. The modem is used for asynchronous data-transmission between automatic data-processing machines, via telephone- lines, in full-duplex and acoustic-coupler modes at a speed of 300 or 1 200 bits per
Classification is determined by General rules 1 and 6 for the interpretation of the Combined Nomenclature, and by the wording of CN codes 8517 and 8517 62 00 (see also the Explanatory Note to the Harmonized System, heading 85.17, part II). Documented CN 2026 code: 85176200.
30 mars 1994