FLAT FLEXIBLE CABLES. CABLES ARE MADE FROM 41 COPPER SIGNAL CONDUCTORS, AND EITHER AN ALUMINIUM OR COPPER SHIELD MATERIAL BONDED TO A PET (POLY ETHYLENE TEREPHTHALATE) INSULATOR, WITH A PET INSULATION WRAP OVER THE TOP. THE ENDS OF THE CONDUCTORS ARE GOLD PLATED, AND USED AS THE CONTACTS OF THE CONNECTOR - SO NO SEPERATE CONTACTS ARE USED. A FERRITE INDUCTOR(S) IS ADDERD ONTO THE OUTSIDE OF THE CABLE TO REDUCE ELECTROMAGNETIC INTERFERENCE. DESIGNED TO CARRY LVDS (LOW VOLTAGE DIFFERENTIAL SIGNALLING) SIGNALS BETWEEN THE MAIN PCB AND LCD PANEL WITHIN A FLAT PANEL TV.

CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S: GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8544 - INSULATED (INCLUDING ENAMELLED OR ANODISED) WIRE, CABLE (INCLUDING CO-AXIAL CABLE) AND OTHER INSULATED ELECTRIC CONDUCTORS, WHETHER OR NOT FITTED WITH CONNECTORS; OPTICAL FIBRE CABLES, MADE UP OF INDIVIDUALLY SHEATHED FIBRES, WHETHER OR NOT ASSEMBLED WITH ELECTRIC CONDUCTORS OR FITTED WITH CONNECTORS. GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 854449 - OTHER ELECTRICAL CONDUCTORS, FOR A VOLTAGE NOT EXCEEDING 1000 V; OTHER THAN WINDING WIRE, OTHER THAN CO-AXIAL CABLE AND OTHER CO-AXIAL ELECTRIC CONDUCTORS, OTHER THAN IGNITION WIRING SETS AND OTHER WIRING SETS OF A KIND USED IN VEHICLES, AIRCRAFT OR SHIPS. OTHER THAN FITTED WITH CONNECTORS. CN CODE 85444993 - OTHER THAN OF A KIND FOR TELECOMMUNICATIONS, FOR A VOLTAGE NOT EXCEEDING 80 VOLTS, OTHER THAN WIRE AND CABLES, WITH INDIVIDUAL CONDUCTOR WIRES OF A DIAMETER EXCEEDING 0.51 MM. TARIC CODE 8544499390 - OTHER THAN ELASTOMERIC CONNECTOR, CONSISTING OF ONE OR MORE CONDUCTOR ELEMENTS AND OF A RUBBER OR SILICON SUBSTRATE; OTHER THAN PET/PVC INSULATED FLEXIBLE CABLE WITH - A VOLTAGE OF NOT MORE THAN 60 V, A CURRENT OF NOT MORE THAN 1 A, A HEAT RESISTANCE OF NOT MORE THAN 105 DEGREES CENTIGRADE, INDIVIDUAL WIRES OF A THICKNESS OF 0.05 MM (+/- 0.01MM) AND WIDTH OF NOT MORE THAN 0.65 MM (+/- 0.03 MM), DISTANCE BETWEEN CONDUCTORS OF NOT MORE THAN 0.5 MM AND PITCH (DISTANCE FROM CENTRELINE TO CENTRELINE OF CONDUCTORS) OF NOT MORE THAN 1.08 MM. ALSO CLASSIFIED IN ACCORDANCE WITH: THE HSEN'S TO HEADING 8544. THE CNEN'S TO HEADING 8544.