Zum Inhalt springen

Übersicht TARIC-Nomenklatur Einreihungsleitfaden vZTA EU-Einreihungsverordnungen EuGH-Rechtsprechung - Tarifliche Einreihung Marktintelligenz Warenursprung Ausfuhrkontrolle CBAM-Rechner EUDR-Prüfung ClassifyAI SH Zollwert Incoterms® 2020

Tarifliche Einreihung

TARIC-Nomenklatur

Einreihungsleitfaden

EU-Einreihungsverordnungen

EuGH-Rechtsprechung - Tarifliche Einreihung

Marktintelligenz

Warenursprung

Ursprungsleitfäden

Ausfuhrkontrolle

Ausfuhrkontrolle

Umwelt

Werkzeuge

ClassifyAI SH/TARIC

Incoterms® 2020

ClassifyAI SH/TARIC

Automatisierte tarifliche Einreihung mit AV-Begründung

Produkt einreihen

Hilfe benötigt?

Stellen Sie eine Frage zu diesem Code oder finden Sie einen Experten für tarifliche Einreihung.

Fragen & Antworten
Regulatorische Nachrichten
Regulierung

AnmeldenRegistrieren

AnmeldenRegistrieren

Übersicht TARIC-Nomenklatur Einreihungsleitfaden vZTA EU-Einreihungsverordnungen EuGH-Rechtsprechung - Tarifliche Einreihung Marktintelligenz Warenursprung Ausfuhrkontrolle CBAM-Rechner EUDR-Prüfung ClassifyAI SH Zollwert Incoterms® 2020

Tarifliche Einreihung

TARIC-Nomenklatur

Einreihungsleitfaden

EU-Einreihungsverordnungen

EuGH-Rechtsprechung - Tarifliche Einreihung

Marktintelligenz

Warenursprung

Ursprungsleitfäden

Ausfuhrkontrolle

Ausfuhrkontrolle

Umwelt

Werkzeuge

ClassifyAI SH/TARIC

Incoterms® 2020

ClassifyAI SH/TARIC

Automatisierte tarifliche Einreihung mit AV-Begründung

Produkt einreihen

Hilfe benötigt?

Stellen Sie eine Frage zu diesem Code oder finden Sie einen Experten für tarifliche Einreihung.

The Trade Hub
...Zollintelligenz
Einreihungsverordnungen

EU-Einreihungsverordnungen

Offizielle tarifliche Einreihungsentscheidungen der Europäischen Kommission

Siehe auch

TARIC-Nomenklatur

25 000+ codes

vZTA

1 000 000+ BTI

Einreihungsleitfaden

1 095 HS4

8 Einreihungsverordnungen

Colour liquid crystal display (LCD) module with a diagonal measurement of the screen of 16,5 cm (6,5 inches) with mounting devices on the side, an aluminium heat sink on the back, with dimensions of approximately 16 × 10 × 2 cm. The module comprises a low-voltage differential signalling (LVDS) receiver, a light-emitting diode (LED) backlight with integrated brightness control, a LED driver circuit, printed circuit boards with control electronics for pixel-addressing only comprising a microcontro

Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature, Note 2(b) to Section XVI, Note 2(f) to Section XVII and by the wording of CN codes 8529, 8529 90 and 8529 90 92. As the module does not have any video signal processing components, classification as an incomplete monitor under heading 8528 is excluded. The module is not classifiable in heading 8531, because it is not considered to be an electrical visual signalling apparatus of heading 8531 or a part of such an apparatus in view of its characteristics (see also the HS Explanatory Notes to heading 8531). The module comprises a backlight unit, LED driver circuit and printed circuit boards with control electronics for pixel addressing only. Consequently, classification under heading 9013 is excluded (see also the HS Explanatory Notes to heading 9013 (1)). As the module is designed for displaying video signals it is a part classifiable under heading 8529 (see also the CN Explanatory Notes to subheading 8529 90 92). It is therefore to be classified under CN code 8529 90 92 as a part suitable for use solely or principally with the apparatus of heading 8528. Documented CN 2026 code: 8524. Commission 2026 transposition note: 8524 Introduction of new heading 8524 that now covers Flat panel display modules.

19. März 2013

Stand of rectangular shape measuring approximately 55 × 31 cm, made of glass of fused silica, of a thickness of 8 mm. The stand includes a 5 cm high glass cylinder with a diameter of 5,5 cm and a specially designed mounting bracket. A console made of plastics of rectangular shape measuring approximately 17 × 10 × 2,5 cm is attached to the mounting bracket. The stand is used as a support for a television set to be placed, for example, on a table.

Classification is determined by General Rules 1, 3(b) and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7020 00 and 7020 00 10. The presence of the stand is not indispensable for the functioning of a television set of heading 8528. Classification under heading 8529 as a part suitable for use solely or principally with the apparatus of headings 8525 to 8528 is therefore excluded. The stand is therefore to be classified according to the constituent material which gives it its essential character (glass). The article is therefore to be classified under CN code 7020 00 10 as other articles of glass of fused silica. Documented CN 2026 code: 8529, 8525, 8528, 8524. Commission 2026 transposition note: “under heading 8529 as a part suitable for use solely or principally with the apparatus of headings 8525 to 8528” to be replaced by ”under heading 8529 as a part suitable for use solely or principally with the apparatus of headings 8524 to 8528”

2. Apr. 2012

Liquid crystal display (LCD) panel (so- called ‘LCD module’) with a diagonal measurement of approximately 66 cm (26 inches), consisting of an active- matrix liquid-crystal layer sandwiched between two sheets of glass, fitted with connectors. Between the first sheet of glass and the layer of liquid crystal, there is a thin-film-transistor (TFT) matrix that provides the appropriate voltage to the pixels. Between the layer of liquid crystal and the second sheet of glass, there is a RGB filter that

Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature, Note 2(b) to Section XVI and by the wording of CN codes 8529, 8529 90 and 8529 90 92 and TARIC code 8529909244. As the LCD module is equipped with “source drivers IC” which are more than electrical connections (i.e. for the supply of power), classification under heading 9013 as active matrix liquid crystal devices is excluded (see also the HS Explanatory Notes to heading 9013 (1)). As the module consists of a TFT liquid crystal layer sandwiched between two sheets of glass and equipped with control electronics for pixel addressing used in the manufacture of monitors or reception apparatus for television of heading 8528, it is considered to be a part for use solely or principally with apparatus of heading 8528 under CN code 8529 90 92. The product is therefore to be classified under TARIC code 8529909244 as an LCD module solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only. Documented CN 2026 code: 8524. Commission 2026 transposition note: 8524 Introduction of new heading 8524 than now covers Flat panel display modules.

18. Nov. 2011

Liquid crystal display (LCD) panel (so- called ‘LCD module’) with a diagonal measurement of approximately 66 cm (26 inches), consisting of an active- matrix liquid-crystal layer sandwiched between two sheets of glass, fitted with connectors. Between the first sheet of glass and the layer of liquid crystal, there is a thin-film-transistor (TFT) matrix that provides the appropriate voltage to the pixels. Between the layer of liquid crystal and the second sheet of glass, there is a RGB filter that

Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature, Note 2(b) to Section XVI and by the wording of CN codes 8529, 8529 90 and 8529 90 92 and TARIC code 8529909244. As the LCD module is equipped with “source drivers IC” which are more than electrical connections (i.e. for the supply of power), classification under heading 9013 as active matrix liquid crystal devices is excluded (see also the HS Explanatory Notes to heading 9013 (1)). As the module consists of a TFT liquid crystal layer sandwiched between two sheets of glass and equipped with control electronics for pixel addressing used in the manufacture of monitors or reception apparatus for television of heading 8528, it is considered to be a part for use solely or principally with apparatus of heading 8528 under CN code 8529 90 92. The product is therefore to be classified under TARIC code 8529909244 as an LCD module solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only. Documented CN 2026 code: 8524. Commission 2026 transposition note: 8524 Introduction of new heading 8524 than now covers Flat panel display modules.

18. Nov. 2011

Item 2: Product, known as an ‘LCD module (touch screen type)’, in the form of an active matrix liquid crystal device with a backlight unit, inverters and printed circuit boards with control electronics for pixel addressing only. The liquid crystal device consists of a liquid crystal layer sandwiched between two sheets of glass. The outer layer of the glass cells is coated with a thin metallic electrically conductive and resistive layer. The module is based on thin-film transistor (TFT) technolog

Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature, Note 2(c) to Section XVI and by the wording of CN codes 8548, 8548 90 and 8548 90 90. The module is a part which is not suitable for use solely or principally with a particular kind of machine of Section XVI. Therefore it is classified under heading 8548 by virtue of Note 2(c) to Section XVI. Documented CN 2026 code: 8524. Commission 2026 transposition note: 8524 Introduction of new heading 8524 that now covers Flat panel display modules.

28. Juni 2006

Item 1: Graphic and alphanumeric display based on the monochrome passive matrix liquid crystal display technology. The display consists of a liquid crystal layer sandwiched between two sheets or plates of glass with a number of dots (presented in 64 lines and 240 columns) and an electronic interface board of C-MOS technology. It can be incorporated with other products. It is unable to display video images.

Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 8531, 8531 20 and 8531 20 95. The display has an electronic interface board. Therefore it cannot be classified as a liquid crystal device of heading 9013 (see also HS Explanatory Notes to heading 9013 (1)). The display does not incorporate electronics to reproduce video signals. Therefore it cannot be classified as a video monitor of heading 8528. The display is an indicator panel of heading 8531 as it is only capable of displaying graphics and alpha-numeric characters (see also HS Explanatory Notes to heading 8531 (D)). Documented CN 2026 code: 8524. Commission 2026 transposition note: 8524 Regulation to be amended

28. Juni 2006

Item 3: Product, known as an ‘LCD module’, in the form of an active matrix liquid crystal device with a backlight unit, inverters and printed circuit boards with control electronics for pixel addressing only. The module is based on thin-film transistor (TFT) technology. It has overall dimensions of 75,9 (W) × 44,9 (H) × 4,9 (D) cm, a diagonal screen measurement of 81,6 cm (32 inches) and a resolution of 1 366 × 768 pixels. The module does not incorporate any other electronic components (for exam

Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature, Note 2(b) to Section XVI and by the wording of CN codes 8529, 8529 90 and 8529 90 92. The module cannot be classified under heading 9013 because it comprises a backlight unit, inverters and printed circuit boards with control electronics for pixel addressing only (see also HS Explanatory Notes to heading 9013 (1)). The module is not classifiable in heading 8473 as a part of a display unit of an automatic data- processing machine, because it is not suitable for use solely or principally with an automatic data-processing machine of heading 8471. The module is not classifiable in heading 8531, because it is not considered to be an electrical visual signalling apparatus of heading 8531 or a part of such an apparatus in view of its characteristics (see also HS Explanatory Notes to heading 8531). Because of its characteristics (such as dimensions and resolution) the module is classifiable under heading 8529 because it is suitable for use solely or principally with apparatus of heading 8528. Documented CN 2026 code: 8524. Commission 2026 transposition note: 8524 Introduction of new heading 8524 that now covers Flat panel display modules.

28. Juni 2006

Item 3: 42-inch plasma screen with format 16:9 and resolution of 852 × 480 pixels. It consists of an aluminium frame containing a layer of plasma cells between two glass plates, with address- and display-electrodes. It is equipped with flat cabling, but no other electronic components (such as drivers or a power supply) or interface for connecting up to other apparatus. It is for use in the manufacture of a video monitor. (See photograph C) (*)

Classification is determined by the provisions of General Rules 1 and 6 for the interpretation of the Combined Nomenclature, Note 2(b) to Section XVI and by the wording of CN codes 8529, 8529 90 and 8529 90 92. The product cannot be classified as an unfinished product by virtue of General Rule 2(a) for the interpretation of the Combined Nomenclature because the product is only equipped with ribbon cables. The product is not classifiable in heading 8473 as a part of a display unit of an automatic data processing machine or in heading 8531 as a part of an indicator panel, because it is not suitable for use solely or principally with an automatic data processing machine of heading 8471 or with an indicator panel of heading 8531. In view of its dimensions and characteristics, the product is classifiable under heading 8529 being a part of a video monitor of heading 8528. Documented CN 2026 code: 8524. Commission 2026 transposition note: 8524 Introduction of new heading 8524 that now covers Flat panel display modules.

16. Dez. 2004