PLYWOOD, WITH A CORE OF 7 INNER LAYERS OF POPLAR (POPULAS) AND A FACE AND BACK LAYER OF PHENOLIC FILM, EDGE PAINTED. EACH INNER LAYER OF POPLAR IS 1.8MM THICK AND POSITIONED PERPENDICULARLY TO THE LAYER ABOVE AND BELOW. DURING THE MANUFACTURING PROCESS THE CORE IS GLUED, COMPRESSED AND SANDED. THE TWO OUTER LAYERS OF PHENOLIC FILM HAVE A THICKNESS OF 0.2MM/UNIT WEIGHT OF 130GR/M2. THEY ARE HOT PRESSED ONTO THE CORE AND PERMEATE INTO THE TIMBER. THE SIZE OF EACH SHEET IS 2440 X 1220MM, TOTAL THICKNESS 12MM. THE PLYWOOD SHEETS ARE PACKED IN CRATES OF 75 PIECES, STEEL STRAPPED WITH TIMBER WASTE SHEETS FOR PROTECTION. INTENDED FOR TEMPORARY NON STRUCTURAL WORKS IN CONSTRUCTION.

CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 4412 - PLYWOOD, VANEERED PANELS AND SIMILAR LAMINATED WOOD GIR 5(B) HAS BEEN USED TO IDENTIFY THE PACKAGING GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 4412 33 - OTHER PLYWOOD CONSISTING SOLELY OF SHEETS OF WOOD (OTHER THAN BAMBOO), EACH PLY NOT EXCEEDING 6MM THICKNESS: OTHER, WITH AT LEAST ONE OUTER PLY OF NON-CONIFEROUS WOOD OF THE SPECIES ALDER (ALNUS SPP.), ASH (FRAXINUS SPP.), BEECH (FAGUS SPP.), BIRCH (BETULA SPP.), CHERRY (PRUNUS SPP.) CHESTNUT (CASTANEA SPP.), ELM (ULMUS SPP.), EUCALYPTUS (EUCALYPTUS SPP.), HICKORY (CARYA SPP.), HORSE CHESTNUT (AESCULUS SPP.), LIME (TILIA SPP.), MAPLE (ACER SPP.) OAK (QUERCUS SPP.), PLANE TREE (PLATANUS SPP.), POPLAR AND ASPEN (POPULUS SPP.) ROBINIA (ROBINIA SPP.) TULIPWOOD (LIRIODENDRON SPP.) OR WALNUT (JUGLANS SPP.) ALSO CLASSIFIED IN ACCORDANCE WITH:- HARMONIZED SYSTEM EXPLANATORY NOTES (HSEN) (1) TO HEADING 44.12 HARMONIZED SYSTEM EXPLANATORY NOTES (HSEN) TO SUBHEADING 4412.10, 4412.31, 4412.34 AND 4412.39 COMBINED NOMENCLATURE EXPLANATORY NOTES (CNEN) TO 4412 COMMISSION IMPLEMENTING REGULATION (EU) NO 1128/2012