-- Placebos and blinded (or double-blinded) clinical trial kits for a recognised clinical trial, put up in measured doses
Der Ursprung der Waren bestimmt den bei der Einfuhr in die Europäische Union anwendbaren Zollsatz. Je nach Herstellungsland und anwendbarem Handelsabkommen kann der Satz erheblich vom MFN-Satz (Meistbegünstigungssatz) abweichen. Der Nachweis des präferenziellen Ursprungs ermöglicht es Importeuren, ermässigte oder zollfreie Sätze im Rahmen von EU-Freihandelsabkommen zu nutzen.
Dieser HS-Code wird von 102 EU-Präferenzabkommen erfasst. Melden Sie sich an, um die detaillierten Listenregeln einzusehen.
-- Placebos and blinded (or double-blinded) clinical trial kits for a recognised clinical trial, put up in measured doses
CTH
Quelle : Anhang 22-01 DA 2015/2446
Quelle : EU WTO Position
Where the country of origin cannot be determined by application of the prima ry rules and the other
Kapitel 30: Pharmaceutical products
Produktspezifische Listenregeln aus Freihandels- und Präferenzabkommen der EU.
Turkey
CTSH: All non-originating materials used in the production of the good have undergone a change in tariff classification at the 6-digit level (subheading).
A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone.
A maximum of 50% of the ex-works price (EXW) is made up of non-originating parts (MAXNOM).
CTH; materials of same heading may be used if value ≤20% EXW
MaxNOM 70%
Manufacture from materials of any heading, except that of the product
Algeria
Manufacture from materials of any heading, except that of the product
Australia
CTH: All non-originating materials used in the production of the good have undergone a change in tariff classification at the 4-digit level (tariff heading).
Process rule.
Australia
The good has a Regional Value Content (RVC) as calculated under Article 4 of the Origin Reference Document of not less than 40%, whether using the build-up method or build-down method (RVC40).
CTSH: All non-originating materials used in the production of the good have undergone a change in tariff classification at the 6-digit level (subheading).
Caribbean Forum countries (15 states incl. Dominican Republic)
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product.
Cameroon
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product.
Guatemala, El Salvador, Honduras, Nicaragua, Costa Rica, Panama
Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product.
Guatemala, El Salvador, Honduras, Nicaragua, Costa Rica, Panama
Manufacture from: - natural fibres - man-made staple fibres, not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp.
Guatemala, El Salvador, Honduras, Nicaragua, Costa Rica, Panama
Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20% of the ex-works price of the product.
Guatemala, El Salvador, Honduras, Nicaragua, Costa Rica, Panama
The origin of the product in its original classification shall he retained.
Guatemala, El Salvador, Honduras, Nicaragua, Costa Rica, Panama
Manufacture in which the value of all the materials of chapter 39 used does not exceed 20% of the ex-works price of the product.
Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product.
Chile
Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20% of the ex-works price of the product.
Chile
The origin of the product in its original classification shall be retained.
Colombia, Peru, Ecuador
Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20% of the ex-works price of the product.
Colombia, Peru, Ecuador
The origin of the product in its original classification shall be retained.
Colombia, Peru, Ecuador
Manufacture in which the value of all the materials of chapter 39 used does not exceed 20% of the ex-works price of the product.
Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product.
Colombia, Peru, Ecuador
Manufacture from: - natural fibres - man-made staple fibres, not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp.
Colombia, Peru, Ecuador
Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product.
Cote d'Ivoire
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product.
Kenya, Rwanda (others pending ratification)
Spinning of natural and / or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by knitting or Knitting accompanied by dyeing or by flocking or by coating or Flocking accompanied by dyeing or by printing or Dyeing of yarn of natural fibres accompanied by knitting.
Twisting or texturing accompanied by knitting provided that the value of the non- twisted/non- textured yarns used does not exceed 50% of the ex-works price of the product.
Kenya, Rwanda (others pending ratification)
Manufacture from materials of any heading, except that of the product.
Manufacture in which the value of all the materials used does not exceed 70% of the ex-works price of the product.
Kenya, Rwanda (others pending ratification)
Manufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralized with metal ions, mainly zinc and sodium Manufacture from highly transparent polyester foils with a thickness of less than 23 micron The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 100316 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 percent. Manufacture from materials of any heading, except that of the product.
Manufacture in which the value of all the materials used does not exceed 60% of the ex- work price of the product Manufacture in which the value of all the materials used does not exceed 60% of the ex- work price of the product Manufacture in which the value of all the materials used does not exceed 70% of the ex-works price of the product.
Kenya, Rwanda (others pending ratification)
Manufacture from materials from any heading.
Mauritius, Madagascar, Seychelles, Zimbabwe
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product.
Egypt
The origin of the product in its original classification shall be retained.
Egypt
Manufacture in which the value of all the materials of chapter 39 used does not exceed 20% of the ex-works price of the product.
Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product.
Egypt
Manufacture from: - natural fibres - man-made staple fibres, not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp.
Egypt
Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product.
Egypt
Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20% of the ex-works price of the product.
Faroe Islands
Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20% of the ex-works price of the product.
Faroe Islands
The origin of the product in its original classification shall be retained.
Faroe Islands
Manufacture in which the value of all the materials of chapter 39 used does not exceed 20% of the ex-works price of the product.
Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product.
Faroe Islands
Manufacture from: - natural fibres - man-made staple fibres, not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp.
Faroe Islands
Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product.
Georgia
Manufacture from: - natural fibres - man-made staple fibres, not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp.
Georgia
The origin of the product in its original classification shall be retained.
Georgia
Manufacture in which the value of all the materials of chapter 39 used does not exceed 20% of the ex-works price of the product.
Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product.
Georgia
Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product.
Georgia
Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20% of the ex-works price of the product.
Ghana
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex‐works price of the product.
Ghana
Manufacture in which the value of all the materials used does not exceed 50% of the ex‐works price of the product.
Israel
Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20% of the ex-works price of the product.
Israel
The origin of the product in its original classification shall be retained.
Japan
CTSH: All non-originating materials used in the production of the good have undergone a change in tariff classification at the 6-digit level (subheading).
A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation or biotechnological processing is undergone.
Jordan
The origin of the product in its original classification shall be retained.
Jordan
Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20% of the ex-works price of the product.
Kenya
Manufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralized with metal ions, mainly zinc and sodium Manufacture from highly transparent polyester foils with a thickness of less than 23 micron The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 100316 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 percent. Manufacture from materials of any heading, except that of the product.
Manufacture in which the value of all the materials used does not exceed 60% of the ex- work price of the product Manufacture in which the value of all the materials used does not exceed 60% of the ex- work price of the product Manufacture in which the value of all the materials used does not exceed 70% of the ex-works price of the product.
Kenya
Spinning of natural and / or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by knitting or Knitting accompanied by dyeing or by flocking or by coating or Flocking accompanied by dyeing or by printing or Dyeing of yarn of natural fibres accompanied by knitting.
Twisting or texturing accompanied by knitting provided that the value of the non- twisted/non- textured yarns used does not exceed 50% of the ex-works price of the product.
Kenya
Manufacture from materials of any heading, except that of the product.
Manufacture in which the value of all the materials used does not exceed 70% of the ex-works price of the product.
Kenya
Manufacture from materials from any heading.
Lebanon
Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product.
Lebanon
Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20% of the ex-works price of the product.
Lebanon
The origin of the product in its original classification shall be retained.
Lebanon
Manufacture in which the value of all the materials of chapter 39 used does not exceed 20% of the ex-works price of the product.
Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product.
Lebanon
Manufacture from: - natural fibres - man-made staple fibres, not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp.
Mexico
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product.
Moldova
Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product.
Moldova
Manufacture from: - natural fibres - man-made staple fibres, not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp.
Moldova
Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20% of the ex-works price of the product.
Moldova
The origin of the product in its original classification shall be retained.
Moldova
Manufacture in which the value of all the materials of chapter 39 used does not exceed 20% of the ex-works price of the product.
Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product.
Morocco
Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20% of the ex-works price of the product.
Morocco
Manufacture from: - natural fibres, - man-made staple fibres, not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp.
Morocco
Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product.
Morocco
The origin of the product in its original classification shall be retained.
Morocco
Manufacture in which the value of all the materials of chapter 39 used does not exceed 20% of the ex-works price of the product.
Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product.
New Zealand
CTSH: All non-originating materials used in the production of the good have undergone a change in tariff classification at the 6-digit level (subheading).
The good has a Regional Value Content (RVC) as calculated under Article 4 of the Origin Reference Document of not less than 40%, whether using the build-up method or build-down method (RVC40).
Papua New Guinea, Fiji, Samoa, Solomon Islands
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product.
Palestine
Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product.
Palestine
The origin of the product in its original classification shall be retained.
Palestine
Manufacture in which the value of all the materials of chapter 39 used does not exceed 20% of the ex-works price of the product.
Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product.
Palestine
Manufacture from: - natural fibres - man-made staple fibres, not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp.
Palestine
Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20% of the ex-works price of the product.
Singapore
Manufacture from materials of any heading.
South Korea
Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20% of the ex-works price of the product.
South Africa, Botswana, Lesotho, Eswatini, Namibia, Mozambique
Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product.
South Africa, Botswana, Lesotho, Eswatini, Namibia, Mozambique
Manufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralised with metal ions, mainly zinc and sodium.
Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product.
South Africa, Botswana, Lesotho, Eswatini, Namibia, Mozambique
Manufacture in which the value of any materials classified in the same heading as the product does not exceed 20% of the ex-works price of the product.
South Africa, Botswana, Lesotho, Eswatini, Namibia, Mozambique
Manufacture from highly transparent polyester foils with a thickness of less than 23 micron. The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 100316 by Gardener Hazemeter (i.e. Hazefactor) - is less than 2 percent.
Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product.
South Africa, Botswana, Lesotho, Eswatini, Namibia, Mozambique
Manufacture in which the value of any materials of chapter 39 used does not exceed 50% of the ex-works price of the product.
Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product.
South Africa, Botswana, Lesotho, Eswatini, Namibia, Mozambique
Manufacture in which: - the value of all the materials used does not exceed 50% of the ex-works price of the product - the value of any materials of chapter 39 used does not exceed 20% of the ex-works price of the product In the case of the products composed of materials classified both within heading 3901 to heading 3906, on the one hand, and within heading 3907 to heading 3911, on the other hand, this restriction only applies to the group of materials which predominates by weight in the product.
Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product.
South Africa, Botswana, Lesotho, Eswatini, Namibia, Mozambique
Manufacture in which the value of the materials of chapter 39 used does not exceed 20% of the ex-works price of the product In the case of the products composed of materials classified both within heading 3901 to heading 3906, on the one hand, and within heading 3907 to heading 3911, on the other hand, this restriction only applies to the group of materials which predominates by weight in the product.
Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product.
South Africa, Botswana, Lesotho, Eswatini, Namibia, Mozambique
Manufacture from yarn. For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
South Africa, Botswana, Lesotho, Eswatini, Namibia, Mozambique
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product.
Switzerland
Specific process(es). See Introductory Note 9.
Manufacture from materials of any heading.
Tunisia
The origin of the product in its original classification shall be retained.
Tunisia
Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20% of the ex-works price of the product.
Turkey
CTSH: All non-originating materials used in the production of the good have undergone a change in tariff classification at the 6-digit level (subheading).
A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone.
United Kingdom
CTSH: All non-originating materials used in the production of the good have undergone a change in tariff classification at the 6-digit level (subheading).
A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone.
Ukraine
Manufacture from: - natural fibres - man-made staple fibres, not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
Ukraine
Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product.
Ukraine
Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20% of the ex-works price of the product.
Ukraine
The origin of the product in its original classification shall be retained.
Ukraine
Manufacture in which the value of all the materials of chapter 39 used does not exceed 20% of the ex-works price of the product. In the case of the products composed of materials classified within both heading 3901 to heading 3906, on the one hand, and within heading 3907 to heading 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product.
Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product.
Vietnam
Manufacture from materials of any heading.
Norway, Iceland, Liechtenstein
Specific process(es). See Introductory Note 9.
Manufacture from materials of any heading.
CTH; materials of same heading may be used if value ≤20% EXW
MaxNOM 50%
CTH; materials of same heading may be used if value ≤20% EXW
MaxNOM 50%
Manufacture from materials of any heading.
Manufacture from materials of any heading.
The EU imported 9.4 Md€ (Jan 2022 – Mar 2026) for this HS code, with United States as the main supplier.
EU-Einfuhren
9.4 Md€
EU-Ausfuhren
28.6 Md€
Saldo
19.3 Md€
Wichtigste Lieferländer (Extra-EU)
Process rule.
A maximum of 50% of the ex-works price (EXW) is made up of non-originating parts (MAXNOM).
Your goods contain a Regional Value Content (RVC) of at least 55% of the Free on Board (FOB) cost of the goods.
Process Rule.
A maximum of 50% of the ex-works price (EXW) is made up of non-originating parts (MAXNOM).
A maximum of 50% of the ex-works price (EXW) is made up of non-originating parts (MAXNOM).